Wheel Options for "88 3.2 Mondial Cab? | FerrariChat

Wheel Options for "88 3.2 Mondial Cab?

Discussion in 'Technical Q&A' started by hershey, Apr 8, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. hershey

    hershey Rookie

    Joined:
    Dec 31, 2005
    Messages:
    26
    Location:
    Bay Area, NoCal
    Does any one have or know of an 18" wheel option for these cars? If so where did they get them from?
     
  2. Auraraptor

    Auraraptor F1 World Champ Lifetime Rossa Owner

    Joined:
    Sep 25, 2002
    Messages:
    13,969
    Location:
    MO
    Full Name:
    Omar
    Those of any late model Ferrari.

    Ebay
     
  3. CliffBeer

    CliffBeer Formula 3

    Joined:
    Apr 3, 2005
    Messages:
    2,198
    Location:
    Seattle, Washington
    Full Name:
    Cliff
    You may have to change the wheel bolts for greater or lesser length depending on the particular 18" Ferrari wheel you select. As indicated above, most later Ferrari wheels will fit the bolt pattern, however, not all will fit within the confines of the wheel well. Stock was 8 inches on the rear and 7 inches on the front - you may be able to get away with 9/8 respectively but that'll be about it. People have put the 360 wheels on a 3.2 Mondial and they do look good and apparently fit OK. Good luck!
     
  4. Auraraptor

    Auraraptor F1 World Champ Lifetime Rossa Owner

    Joined:
    Sep 25, 2002
    Messages:
    13,969
    Location:
    MO
    Full Name:
    Omar
    Good advice. As you indicate, the fine details are a bit more complicated, but I figured it was a place to start. :)
     
  5. Shark49

    Shark49 Formula Junior

    Joined:
    Mar 31, 2005
    Messages:
    773
    Location:
    Boone, NC
    Full Name:
    Nathan
    Do a search. I have seen a few posts and generally I think the consensus is that 17's are better fit and look better than 18's for some reason. 18's look too big
     
  6. hershey

    hershey Rookie

    Joined:
    Dec 31, 2005
    Messages:
    26
    Location:
    Bay Area, NoCal
    Excellent ... thanks for the advice.
     
  7. mg54

    mg54 Rookie

    Joined:
    Jan 12, 2005
    Messages:
    48
    Location:
    Massachusetts
    Full Name:
    Michael Gardner
    I put a pair of 360 modena wheels with Bridgestones on my 85 mondi cab. They bolt right on with longer bolts available from Hill Engineering. Amazing difference in looks....

    Mike G
     

Share This Page