Wheel Rash/Spec Wheel | FerrariChat

Wheel Rash/Spec Wheel

Discussion in 'Rocky Mountain' started by BoulderFCar, Jan 26, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. BoulderFCar

    BoulderFCar F1 World Champ Silver Subscribed

    Joined:
    Dec 16, 2004
    Messages:
    13,177
    Location:
    Asheville, NC/Ft Lauderdale
    Full Name:
    Tom
    I have light finish damage on two rims from tie downs. Unfortunately, the rims will have to be stripped and refinished. Has anybody used Spec Wheel in Denver or are there other recommedations in Denver? I don't want to ship.
    Thanks,
     
    BoulderFCar, Jan 26, 2005
    #1
  2. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ Lifetime Rossa

    Joined:
    Jan 11, 2001
    Messages:
    26,783
    Location:
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    I've used Keystone (http://www.keystone-auto.com) in Denver a couple of times on my TR wheels -- which are Aluminum alloy, not Magnesium alloy so I'd check that point with any vendor depending on what wheel material you have (could affect the stripping process) and what sort of "damage" repair is required -- with good results for the $value IMO, but that's with me doing the wheel/tire/valve stem disassembly and reassembly, and using a little bit brighter/lighter (Mercedes?) silver~grey color.

    The first time I drove them down to their shop myself, and they delivered them back to my residence (in primo boxes). The second time I arranged to leave them at a local body shop (ABRA) in Boulder for pick-up, and they again delivered them back to my residence.
     
    Steve Magnusson, Jan 26, 2005
    #2

Share This Page