Wheels and bolt pattern | FerrariChat
Buy

Wheels and bolt pattern

Discussion in 'Ferrari Discussion (not model specific)' started by DonJuan348, Aug 9, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. DonJuan348

    DonJuan348 F1 Rookie
    Owner

    Aug 5, 2008
    4,442
    Taxing Jersey
    #1 DonJuan348, Aug 9, 2008
    can you use the wheels from the newer cars(360/430 wheels) on the 308/328, Mondial...and what is the bolt pattern
     
  2. Meister

    Meister F1 Veteran
    Silver Subscribed

    Apr 27, 2001
    5,516
    Duluth, MN
    Full Name:
    The Meister
    #2 Meister, Aug 9, 2008
    Yes if you use spacers to get the right offset.

    IIRC, 308's are 5X108MM or 5x4.25"
     
  3. Fast_ian

    Fast_ian Two Time F1 World Champ

    Sep 25, 2006
    23,397
    Campbell, CA
    Full Name:
    Ian Anderson
    #3 Fast_ian, Aug 9, 2008
    I do know 360's are 5 x 108. No idea on offset, but at least the bolts will fit......
     
  4. Meister

    Meister F1 Veteran
    Silver Subscribed

    Apr 27, 2001
    5,516
    Duluth, MN
    Full Name:
    The Meister
    #4 Meister, Aug 9, 2008
  5. chrismorse

    chrismorse Formula 3

    Feb 16, 2004
    2,150
    way north california
    Full Name:
    chris morse
    #5 chrismorse, Aug 9, 2008
    Last edited by a moderator: Sep 7, 2017
    Front 360 wheels are a straight bolt up with a spacer and longer bolts available from Daniel at Ricambi. The rears, (10.5) can be made to fit but it is easier to run stock 360 fronts, (7.5 inch width) on the back with 360 bolts, (no spacers). I had the rear (10.5x18) narrowed to 9 inches and they fit fine, (I had more room at the rear because i fitted smaller shocks).

    If you are going to run spacers, i would recommend counter boring the two attachment holes for a cap head screw. This enables you to pull the wheel without having the spacer fall off. It is difficult enough to install any wheel without having to worry about the spacer falling off.

    If you want more info, PM me and i'd be happy to discuss it.

    hth,
    chris
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     

Share This Page