When changing Brake pads on a 360 | FerrariChat
Buy

When changing Brake pads on a 360

Discussion in '360/430' started by djastral69, Jan 27, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. djastral69

    djastral69 Formula 3
    Silver Subscribed

    Aug 6, 2007
    1,896
    Fl
    Full Name:
    David
    #1 djastral69, Jan 27, 2010
    When changing brake pads on my 360 with 13K miles. Do I change the rotors as well? The pads are not all the way down but I thought I'd nip it now.
     
  2. cwwhk

    cwwhk Formula 3

    Nov 13, 2003
    1,535
    Hong Kong, Tokyo
    Full Name:
    Wayne
    #2 cwwhk, Jan 27, 2010
    Check for rotor thickness, uneven wear grooves and cracks. Minimum rotor thickness is usually stamped at the edge of the rotors.

    No need to change if all is within spec. I doubt at 13K you need to change the rotors, unless there were some unusual usage and wear.
     
  3. blkdiablo33

    blkdiablo33 F1 Rookie

    Jul 12, 2004
    4,459
    #3 blkdiablo33, Jan 27, 2010
    can the rotors be resurfaced if there within specs?
     
  4. FerrariDublin

    FerrariDublin F1 Rookie

    Jun 14, 2009
    3,454
    Dublin, Ireland
    Full Name:
    Greg
    #4 FerrariDublin, Jan 27, 2010
    Not unless there's reason to do so! Are you getting vibration when you apply the brakes?

    Minimum thickness is specified at 26mm
    Max Tolerance for flatness is 0.025mm but they could be resurfaced if that's exceeded.

    Unlikely they need replacement or resurfacing if they feel ok in use.
     

Share This Page