Buy

Where can I find parts for my Classic Ferrari?

Discussion in '308/328' started by MRyan, Aug 18, 2004.

  1. rolindsay

    rolindsay Formula 3

    Jul 14, 2006
    1,022
    Houston, TX
    Full Name:
    Rick Lindsay
    Exactly the same as my '79 308GTB.
     
  2. To remove this ad click here.

  3. steve-gt4

    steve-gt4 Rookie

    Oct 24, 2006
    13
    Surrey England
    Full Name:
    Steve
    Yep,Superformance are very good,reasonable prices too.
     
  4. bernardo66

    bernardo66 The Crazy Cat Man
    Moderator Owner

    Dec 14, 2003
    21,954
    Montreal Canada
    Full Name:
    Bernie
    So what will it take for Ferrari Classiche to produce a batch of Veglia Clocks for our 308's???
     
  5. Javelin276

    Javelin276 Formula Junior

    Jan 16, 2005
    512
    Idaho
    Full Name:
    Thor Zollinger
    I HIGHLY recommend adding a bolt-on supercharger.
    My Mondial-8 was pretty sluggish until I added some extra horsepower.

    Now it's as fast as a 348!

    Carl's kit has every part in it you need and comes with a great installation manual with lots of photos.
    Check it out here:

    http://www.928motorsports.com/parts/ferrarisupercharger.php
     
  6. spiderseeker

    spiderseeker Formula 3

    Jul 22, 2005
    1,708
    Colorado
    Full Name:
    Steve
    I had mine repaired by a local clock repair shop for $50. Check your local phone book. (Just DON'T tell him it's for a Ferrari ) He just changed the lense on mine.
     
  7. To remove this ad click here.

  8. 1975gt4don

    1975gt4don Formula Junior

    Nov 5, 2003
    662
    Peoples Rep of CA
    Full Name:
    Smog Exempt
    Stuart, I just sent you a PM, have tried unsuccessfully 4 times during the past 2 months to order some small parts for my 1975 308GT4. Hope you can help.
     
  9. barcheta

    barcheta F1 Rookie

    Nov 15, 2003
    3,705
    Bavarian autosport had it for $39.95.

    Part number is 61311363459.

    It fits a BMW 320i, 6and 7 series to 82 and 5 series to 88.
     
  10. 328stig

    328stig Rookie

    Sep 9, 2006
    44
    Full Name:
    Stig
    can anyone help ... am having problems locating a proper GT 4 toolkit . One with the plug spaner and the carb key . .... many thanks
     
  11. altaman

    altaman Karting

    Feb 25, 2005
    68
    michigan
    Full Name:
    BRYAN
  12. To remove this ad click here.

  13. BigTex

    BigTex Seven Time F1 World Champ
    Rossa Subscribed Owner

    Dec 6, 2002
    76,099
    Houston, Texas
    Full Name:
    Bubba
    You have to use a later 328 roll and add the carb tool from Pierce Manifolds.....
     
  14. Mike C

    Mike C F1 Veteran
    Lifetime Rossa Owner

    Aug 3, 2002
    6,075
    Southeast USA
    Full Name:
    Mike Charness
    Except the owner's name is DANIEL (Daniel Pass), and you're right, it IS a great source!!
     
  15. lusso64

    lusso64 Formula 3

    Apr 12, 2004
    1,535
    Simi Valley
    Full Name:
    David
    shhhhhhh..... don't tell Daniel. What he doesn't know won't hurt him :)

    Dave
     
  16. chrismorse

    chrismorse Formula 3

    Feb 16, 2004
    2,149
    way north california
    Full Name:
    chris morse
    I recently received a parts list from Verell's Unobtainium Supply Co.

    I'm absolutely amazed at the large amount of NLA parts Verell now sourcing,
    also, he repairs column(headlight) switches & targa top latches!

    Unobtainium doesn't have a web site yet. So I thought I'd post a list of the
    'unobtainium' he supplies here where people are likely to find it. I didn't
    put prices in the list as they could change over time.

    Verell is constantly adding products, so if you don't see something here,
    send him eMAIL:

    Verell(at)UnobtainiumSupply(dot)com

    Unobtainium takes PayPal sent to: Orders(at)UnobtainiumSupply(dot)com

    Or, you can send checks or money orders made out to:

    Unobtainium Supply Co.
    523 Longley Rd.
    Groton, MA
    01450

    Unobtainium Supply Co.



    Part Description Used On
    ---------------- -------

    Bezel, Lever Black, Unbreakable 308GT4, others

    Bezel, Lever Chrome Unbreakable Al 308GTS/B,400, others

    Cover, Seat Belt Bracket Style A 308, others

    Cover, Seat Belt Bracket Style B 308, others

    Emblem, '308' Black Chrome Plastic 308

    Emblem,308 Black Plastic 308

    Knob, Mirror Switch 308 QV

    Twist Knob, Headlight 328 & Mondial

    Knob, 308 Headlight 308

    Knob, 308GT4 Headlight 308GT4

    Knob,Disc shaped 308,400, others
    (Temp, vent, choke, & switches)

    Latch Housing,Boot 308/328

    Latch Housing,Bonnet 308/328

    Mirror End Cap, Rear, rounded, US Spec. US 308/328

    Mirror Front Cap, Trapezoiodal, US Spec.US 308/328

    Boot Prop Flex Joint 308

    Radiator Bleed Thumb Screw 308, 328 others

    EZ Bleed Bolt, Thermostat Housing 308, 328 others
    (Thru drilled to bleed without removing!!!)

    Shift Shaft Bushing, Delrin (Replaces SilentBloc) 308,328

    Cam Gear Locking Tool, 2V 308, Mondial 2-Valve

    QA1 Shock Adapter Bushings - 4 wheel set 308, & 328 before s/n: 76626

    Paper Weight, QA1 Stretched Eye

    Targa Top Rubber Boot 3x8 GTS

    Targa Top Latch Rubber Nose restoration:Remove any residue of old rubber
    nose, mold a new polyurethane nose. 3x8 GTS



    Column(Cluster) Switch Parts
    ----------------------------
    Description Used On

    Column Switch Brass U-shaped Contacts 308,328,Mondial, others

    Stalk, Headlight
    (Chrome Plated shaft) 330 GTC, others
    Stalk, Turn Signal
    (Chrome Plated shaft) 330 GTC, others
    Stalk, Wiper
    (Chrome Plated shaft) 330 GTC

    Stalk, Turn Signal
    (Black shaft) 308/328
    Stalk, Turn Signal
    (Satin Aluminum shaft) 265 Dino/ 308GT4, others
    Stalk, Wiper
    (Black shaft) 308/328
    Stalk, Wiper
    (Satin Aluminum shaft) 265 Dino/ 308GT4, others


    Column Switch Services
    -----------------------
    Services for 265 Dino/ 308/328/Mondial/365 GT4/ 330 GTC, other with similar
    switches:

    Stalk rebuilding Service (Mold 1 new knob or contact arm on a stalk) You
    remove/install stalk.

    Stalk rebuilding Service (Mold 1 new knob or contact arm on a stalk) We
    remove/install stalk.

    Column Switch Full Service & Stalk Repair: Disassemble, check out, clean,
    remove tarnish & lube contacts, lube moving parts, polish knobs, clean
    lettering & icons. If necessary mold 1 new knob or contact arm on a stalk.

    Column Switch FullSvc w/new stalk:As above, but includes one new Wiper or
    Turn Signal stalk.

    Additional Column Switch repairs are available, they will be charged on a
    time & materials basis.

    When my right vent control bezel broke, all I could find was used plastic pieces, at ridiculous prices. After receiving two new bezels from Unobtanium, I was so impressed with the quality and finish, I bought the rest of the set. They are WAY better than stock.

    The quality is at a minimum equal to stock parts and in most cases a superior part.
    Communication and price are also first rate.

    There is also a wild rumor that he is working on “noweightium”

    Thanks Verell,

    chris
     
  17. James in Denver

    James in Denver Formula 3

    May 23, 2006
    1,955
    Centennial Colorado
    Full Name:
    James in Denver
  18. Sailawaysg

    Sailawaysg Rookie

    Apr 11, 2008
    47
    I'm not sure if you'll get this msg but anyway, I bought the '79 308 from downeast NC. A sweet deal.
    Thanks for your help!
    Steve G.
    p.s. Darryl talked to me about this one also.
     
  19. robertgarven

    robertgarven F1 Veteran
    Rossa Subscribed Owner

    Feb 24, 2002
    5,210
    Ventura, California
    Full Name:
    Robert Garven
    Does anyone have the e-mail for Ferrari UK the one I had and Ferrari SPA sent me no longer work. Does anyone know what's going on there, who still working their and their phone numbers now that they are off the owners site??

    Thanks

    Rob
     
  20. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    11,610
    South East
    Full Name:
    Jimmie
  21. philip litchfield

    Sep 5, 2007
    98
    northants u.k.
    I need part no 60044401 X 2 moon shaped dash vents, for my 79 308GTB,
    Tried all usual places, Rytlands, McCann, Ricambi, Ferrari u.k. but seem out of luck, i suppose they are very rare!
     
  22. Gleggy

    Gleggy Formula 3

    Sep 22, 2004
    1,204
    Land of Oz
    Full Name:
    Gleggy
    Brand new LHD and RHD floor undertrays as per original for 308's GTB/S are available from Forza Automotive email Gerry - gerrydino@optusnet.com.au
    Cheers MG
     
  23. Mike C

    Mike C F1 Veteran
    Lifetime Rossa Owner

    Aug 3, 2002
    6,075
    Southeast USA
    Full Name:
    Mike Charness
  24. irondogmike

    irondogmike Formula 3

    Sep 8, 2006
    2,170
    San Diego area
    Full Name:
    Michael Tucker
    also try www.ferrparts.com for hard to get parts new and old,every part I ever needed ferrparts has come through for me,and ricambi is great to
     
  25. Eagle1

    Eagle1 Rookie
    BANNED

    Feb 13, 2009
    48
    Wisconsin
    Full Name:
    Mark Poulter
    T. Rutlands has good service/availability.. Also try Motion Products www.mpirestorations.com a-lot of vintage parts

    Cheers,
     
  26. fiatbrett

    fiatbrett Karting

    Aug 20, 2009
    98
    Tallahassee, Florida
    Full Name:
    Brett B
    Thought I would post some links for cloth braided fuel hoses for a U.S. 85 308 QV for anyone interested.

    just did all of my fuel, smog, and vapor hoses recently and used a variety of sources to also retain the cloth covered hose. Here are some links I used for cloth covered hoses in a variety of sizes:

    19mm- www.hiperformancestore.com/hosebyfoot.htm

    7mm- www.autohausaz.com/

    5, 7.5, 10, 15, 19, 22mm- www.newcoproducts.com/new/cohline/hoses.php

    6, 9mm- www.pelicanparts.com

    16mm Cavis clear hose, 20mm cloth braided hose- www.italiancarparts.com/parts/308.html#hoses

    I used non-braided 5/8 fuel hose on the vent tube connectors on the firewall, cloth braided 7.5mm for the cloth vent hose which runs the length of the firewall, and Dave Helms hoses for the filler neck, tank to fuel pump, and crossover hoses at the bottom of the car between the tanks.

    Oh, and lastly I bought new steel braided plastic lines from Verrell on the board.

    I used the different sources for availability and costs. Hope this helps!
     
  27. Dave Bendl

    Dave Bendl Formula Junior

    Dec 7, 2003
    732
    Chicagoland
    Full Name:
    Dave Bendl
  28. Declan1

    Declan1 Karting

    Mar 15, 2007
    57
    Stuart, Florida
    Full Name:
    Robert
    #100 Declan1, Oct 13, 2010
    Last edited by a moderator: Sep 7, 2017
    See if this source is still available.

    " I use magna flow 28 inch muffler 2 1/2 inlet + outlet. Its all st/ steel, and bolts to OEm muffler brackets, $900 USD + shipp will be about $150. Also have 360 style keys to suit 308 new repo uncut, $90 + $30 shipp, and new dash vents $400 + shipp. If you need anymore in fo drop me a line."

    Cheers Rizzo
    rizzop@optusnet.com.au
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     

Share This Page