Which adapter for motive power bleeder for F355 | FerrariChat
Buy

Which adapter for motive power bleeder for F355

Discussion in '348/355' started by Badabing!, Mar 26, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Badabing!

    Badabing! Formula Junior

    Mar 30, 2014
    731
    NYC
    #1 Badabing!, Mar 26, 2015
    1997 F355 gated. I contacted Motive customer service who said it could either be 1109 which is the 45mm which is used on most European cars but some ferraris require a cap with a 42mm inside diameter.

    Anyone here know which one this car takes?
     
  2. Mitch Alsup

    Mitch Alsup F1 Veteran

    Nov 4, 2003
    9,739
    #2 Mitch Alsup, Mar 26, 2015
    The Porsche one fits the Ferrari brake fluid reservoir.
     
  3. emac

    emac Formula Junior
    Silver Subscribed

    Sep 14, 2014
    851
    upstate SC
    Full Name:
    ernest
    #3 emac, Mar 26, 2015
    my bmw adapter fits my 355....but it leaked. My gasket may be bad, it is about 20 years old. When I use a power bleeder, I always wrap towels around the reservoir just in case.
     
  4. Badabing!

    Badabing! Formula Junior

    Mar 30, 2014
    731
    NYC
    #4 Badabing!, Mar 27, 2015
    Thanks guys
     
  5. Challenge

    Challenge Formula 3

    Sep 27, 2002
    2,022
    PA
    Full Name:
    Kevin
    #5 Challenge, Mar 27, 2015
    Tighten that thing big time.
     
  6. drbob101

    drbob101 F1 Rookie
    Owner Silver Subscribed

    Nov 26, 2012
    3,821
    Tinton Falls, NJ
    Full Name:
    Bob Ferraris
    #6 drbob101, Mar 27, 2015
    I used a vacuum bleeder at the wheels and clutch. No fuss, no muss, no air in the lines.
     
  7. Badabing!

    Badabing! Formula Junior

    Mar 30, 2014
    731
    NYC
    #7 Badabing!, Mar 28, 2015
    I've read your posts from a couple years back on changing the calipers and lines. I'm looking into that tool also.
     

Share This Page