Which aluminum pedals to buy? | FerrariChat
Buy

Which aluminum pedals to buy?

Discussion in '348/355' started by Mera, Feb 28, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Mera

    Mera Formula Junior

    Aug 13, 2005
    768
    Milwaukee, WI
    Full Name:
    Rodney Dickman
    #1 Mera, Feb 28, 2008
    Not being one to modify my 348 I really like the look of aluminum pedals. I have seen them on another 348 and they look great. The stock pedals do look kind of sad. Especially the gas pedal. :(

    So I am wondering which are the best set of pedals to buy. Are any power coated in clear or anodized so they do not tarnish quickly? Will any protective finish hold up very long? I do drive with bare feet most of the time so this should not matter much to me but may for others. Any clear coat or anodizing will in time wear thru and the raw aluminum will oxidize some and not retain that shiny finish.

    Also the design. I have not shopped for these aluminum pedals but there seems to be a few different designs out there.

    Is it best to get the dead pedal for the left foot also?

    So I'm looking for advice.

    I did upgrade to the titanium shift knob. I felt that it would hold up and stay shiny and was worth the extra cost over aluminum.

    I kind of hate the idea of drilling my stock pedals to put on the aluminum ones but my 348 will probably never be a concours winner. I just like to keep it stock or very close to stock.


    Thanks
    Rodney
    1990 348 TS
     
  2. TheOnlyest

    TheOnlyest Formula 3

    Sep 25, 2007
    1,686
    Las Vegas Nevada, US
    Full Name:
    Steve
    #2 TheOnlyest, Feb 28, 2008
    Get the Hill pedals from Ricambi... and the dead pedal.
    You must be able to operate a drill tho...

    I especially liked them because you can position them where you want them and drill the holes. I was able to space my pedals apart a bit more which made it easier for me to only push 1 pedal at a time! And I shifted all the pedals more to the left so they're a tad closer to being actually centered to the seat!
     
  3. eulk328

    eulk328 F1 Rookie

    Feb 18, 2005
    2,800
    Full Name:
    F683
    #3 eulk328, Feb 28, 2008

    Still not sure if your post is a joke or not..... assuming it's not, are you quite seriously considering putting drilled and "rough-ish" metal pedals on when you state "I do drive with bare feet most of the time..."? I'm really trying to figure this one out. Is it even legal to drive without shoes? I don't think it is here.

    I vote for no drilled pedals. Also, there is a reason the accelerator pedal is smooth and not covered with rubber from the factory (along with the smooth metal plate next to the accelerator).

    Is it best to get the dead pedal also? Yes, if it's what YOU want. No, if it's not what YOU want. You should not be looking for acceptance from anyone else. My advice.
     
  4. Mera

    Mera Formula Junior

    Aug 13, 2005
    768
    Milwaukee, WI
    Full Name:
    Rodney Dickman
    #4 Mera, Feb 28, 2008
    Driving in WI is legal with bare feet. I have aluminum pedals in my 88 Mera. I have no concern about aluminum pedals and how ribbed they are. I am only interested in the cosmetic look of these pedals.

    Rodney
     
  5. Dr.T348

    Dr.T348 Formula 3

    Jan 8, 2004
    1,599
    Chicago NW Burbs
    Full Name:
    Richard T.
    #5 Dr.T348, Feb 28, 2008
    Last edited by a moderator: Sep 7, 2017
    If you are concerned about originality try to find some challenge pedals. Otherwise Hill Engineering. Can't say enough about the quality of anything I've bought directly from him or through Ricambi.
    Image Unavailable, Please Login
     
  6. vvassallo

    vvassallo F1 Veteran

    Aug 4, 2006
    8,328
    Palos Verdes
    Full Name:
    Vince V
    #6 vvassallo, Feb 28, 2008
    The Hills pedals also helped my heel-toe driving. Get them and get them from Daniel.
     
  7. f355spider

    f355spider F1 World Champ
    Owner Rossa Subscribed

    May 29, 2001
    18,045
    USA
    #7 f355spider, Feb 28, 2008
    My buddy John makes some nice ones. Not sure if anyone on Fchat has purchased them yet.

    http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&viewitem=&item=300194490205

    I have no use for them personally, since the 355 has them stock. I have seen his up close and the attention to detail is amazing. He includes hardware and instructions.

    Can't lose with Ricambi/Hill either, I have used a number of Hill products, and they are all outstanding. :)
     
  8. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,220
    Mount Isa, Australia
    Full Name:
    Pap
    #8 PAP 348, Feb 29, 2008

    +1!! :):)
     
  9. fxdwgs

    fxdwgs Formula 3

    Aug 22, 2006
    1,016
    Sjobo, Sweden
    Full Name:
    Bengt
    #9 fxdwgs, Feb 29, 2008
    Last edited by a moderator: Sep 7, 2017
    at my thread........and then try to make Dan to sell you the set.

    You will not regret it.

    //B//




    Image Unavailable, Please Login
     

Share This Page