Who makes these wheels!!!!!! | FerrariChat
Buy

Who makes these wheels!!!!!!

Discussion in 'United Kingdom' started by jonathan.mccall, Jan 28, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 1 of 3
  1. jonathan.mccall

    jonathan.mccall Karting

    Jan 25, 2008
    131
    N.Ireland
    Full Name:
    Johnny Mccall
    #1 jonathan.mccall, Jan 28, 2008
    Last edited by a moderator: Sep 7, 2017
    I have a 3.2 86 Mondial, it is getting a full respray at the moment. I want to upgrade the alloys to 17" or 18" 3 piece. Does anybody know who the manufacturer is? see att. Ive been looking for weeks now! speedline dont make them anymore and stopped supplying to the Ferrari public,Image do a similar one but not just as nice. Please please help as i am close to a divorce as i am never off the PC looking...
    Attached Images
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. charfer GTC

    charfer GTC Rookie

    Jan 20, 2008
    6
    worcester
    Full Name:
    charles haynes
    #2 charfer GTC, Jan 28, 2008
    Hi Jonathon
    These wheels look like Compomotive split rims, i think the model is called the T.S. To see a nice pic of these look at Dave Z's 308 GTS on any of the forums. I believe they do 17" and 18" 3 piece rims.

    Best regards

    Charles
     
  3. trevsked

    trevsked Karting

    Jun 20, 2007
    88
    Rickmansworth, Herts
    Full Name:
    Trevor Skedge
    #3 trevsked, Jan 29, 2008
    Johnny,

    Hope you have been enjoying the car. Keep looking, a set will turn up just as you have given up hope, you know how lucky you Irish are. Looking around for a 3.4 Mondial having bought a Z3M on on the spur of the moment. Did you find the cig lighter?
    Excuse the thread hi-jack.

    Regards Trevor.
     
  4. jonathan.mccall

    jonathan.mccall Karting

    Jan 25, 2008
    131
    N.Ireland
    Full Name:
    Johnny Mccall
    #4 jonathan.mccall, Jan 30, 2008
    Hi Trev hows the foot? I was waiting til i got the car finished before i contacted you.As you have seen i am having a bit of bother with these alloys.Thanks for the advise on the Rev counter, think Rickie and i will give that a go.I spoke to our lorry mechanic he seemed to think speedy cables could only adjust it to a couple of 100th rather than 1000th. I found the cigarette lighter, it fell down from the back of the ashtray, i only found it whilst removing the center console. It had Rickie sweating for a week or two. Ha Ha Ha! We also got the washer motor working, we took the whole bottle out and conected it straight to another battery, thanks again for the advise! Oh one other thing if you dont mind,could you possibly send me an original copy of the car video which you have posted on U tube?.. Good luck with your new wheels Johnny.....
     
  5. ferrari-nut

    ferrari-nut Formula Junior

    May 24, 2005
    402
    UK
    Full Name:
    ANTHONY
    #5 ferrari-nut, Feb 3, 2008
    I don't think they are Compomotive wheels. I think they were manufactured by a company in Italy called SPEEDLINE. They were three piece wheels. I don't think the company still exists.
     
  6. atlSPOTTER

    atlSPOTTER Formula Junior

    Oct 14, 2007
    732
    USA
    Full Name:
    VC
    #6 atlSPOTTER, Feb 3, 2008
    very f40 like...i like them
     
  7. jonathan.mccall

    jonathan.mccall Karting

    Jan 25, 2008
    131
    N.Ireland
    Full Name:
    Johnny Mccall
    #7 jonathan.mccall, Feb 3, 2008
    Compomotives wheel is v similar, but wont fit Mondial. Think they are Speedline alright,they dont make it any more. Looking for 2nd hand ones. Not having much luck though
     
  8. Mule

    Mule F1 Rookie
    Owner Rossa Subscribed

    Jun 25, 2003
    3,758
    Alaska
    Full Name:
    Mule
    #8 Mule, Feb 3, 2008
    That is odd. When I bought my Compomotives, they said that they can make them for any Ferrari. Mine being an 89 328, it has different offsets, but was no problem. See profile pic.
     
  9. MondialNeil

    MondialNeil Formula Junior

    Apr 2, 2007
    427
    Bucks,UK
    Full Name:
    Neil S Perry
    #9 MondialNeil, Feb 6, 2008
    Last edited by a moderator: Sep 7, 2017
  10. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,667
    South East
    Full Name:
    Jimmie
    #10 greyboxer, Feb 6, 2008
    There's thread selling three (!) in the 328/Mondial section
     
  11. Tifosi66

    Tifosi66 Formula 3

    Nov 30, 2004
    1,786
    Jiang Jia Jie
    Full Name:
    Li-Ge
    #11 Tifosi66, Feb 6, 2008
    First pic is a Speedline Mistral 3-piece and yes, they're already discontinued. Second pic is prolly from Image or some one-off German manufacturer. Best bet is Compomotive's TS series and you can specify the width and offsets. If you're really set on the Mistrals, try contacting Jasmine Motorsports/Wheels or specialized aftermarket wheels shops.. When I was in Blighty years ago, I remember that they carry some NOS wheels from various manufacturers.

    There was a recent Fchat Mondial t owner in the States with them Mistral 3piece that came with the car.
     
  12. jonathan.mccall

    jonathan.mccall Karting

    Jan 25, 2008
    131
    N.Ireland
    Full Name:
    Johnny Mccall
    #12 jonathan.mccall, Feb 8, 2008
    MMMH nice wheels MondialNeil! Is that your Mondial with those wheels im after.Ha...Def speedlines im after. There was an old ebay site i found which had 18" speedlines with Met grey spokes, sometime around December in usa! I fired him off an email and he replyed saying he sold them only a week ago for $600 Bummer! tried a compomotive dealer and he said the same as compomotive,apparently they wont fit a mondial?????? Oh tried Jasmine they will get back to me, that was on thursday!
     
  13. isuk

    isuk F1 Rookie

    Nov 11, 2005
    3,331
    UK
    Full Name:
    Iain
    #13 isuk, Feb 8, 2008
    I've just looked on the Speedline Corse website and they are showing style 2311 on their which to my eyes looks exactly what you are after http://www.speedlinecorse.co.uk/
     
  14. jonathan.mccall

    jonathan.mccall Karting

    Jan 25, 2008
    131
    N.Ireland
    Full Name:
    Johnny Mccall
    #14 jonathan.mccall, Feb 8, 2008
    If only it was that simple! I spoke with speedline weeks ago.They wont sell them to me, Ferrari put a stop to that. They said its been 7yrs since they sold to the public Ferrari wise.
     
  15. isuk

    isuk F1 Rookie

    Nov 11, 2005
    3,331
    UK
    Full Name:
    Iain
    #15 isuk, Feb 9, 2008
    Bit naughty of them to show them on their website then.
     
  16. MondialNeil

    MondialNeil Formula Junior

    Apr 2, 2007
    427
    Bucks,UK
    Full Name:
    Neil S Perry
    #16 MondialNeil, Feb 9, 2008
    Yeah my Mondial.
     
  17. jonathan.mccall

    jonathan.mccall Karting

    Jan 25, 2008
    131
    N.Ireland
    Full Name:
    Johnny Mccall
    #17 jonathan.mccall, Feb 10, 2008
    Thats great Neil! First of all, it looks really well. Would like to ask you are they 18",whats the offset, pcd? What did they come off. How does the car handle compared to originals. Do you have any rubbing! Where did you get them???
     
  18. MondialNeil

    MondialNeil Formula Junior

    Apr 2, 2007
    427
    Bucks,UK
    Full Name:
    Neil S Perry
    #18 MondialNeil, Feb 12, 2008
    Well my Mot tester thinks she is in good condition, QV London also said the same.

    They are 18in three piece split rims and came off a Testarossa.

    They were as new with new 265 rear tyres on the 10in rims and new 225 on the front 8in rims.

    They came up on Ebay and I got them for £1000.

    There is no rubbing at all, I did have to get longer wheel bolts though, proper one piece cut ones, apparently there is a difference, the bolts were a £100.

    As for driving they are fine, I am not a racer so not sure really how much better they perform handling wise but, they look a lot better.

    Offset and Pcd not sure would have to look on the rims.
     
  19. jonathan.mccall

    jonathan.mccall Karting

    Jan 25, 2008
    131
    N.Ireland
    Full Name:
    Johnny Mccall
    #19 jonathan.mccall, Feb 13, 2008
    You got yourself a bargan esp being in good condition! I spoke to Mike today out of QV London. He had a set of split rims himself, no one would refurb them. He had to take them apart himself and get them painted and polished, which wasnt cheap. Also he replaced the nuts and bolts At 200 quid! Might go to Image after all
     
  20. MondialNeil

    MondialNeil Formula Junior

    Apr 2, 2007
    427
    Bucks,UK
    Full Name:
    Neil S Perry
    #20 MondialNeil, Feb 14, 2008
    Mike did my cambelts on the 6 Feb.
     
  21. jonathan.mccall

    jonathan.mccall Karting

    Jan 25, 2008
    131
    N.Ireland
    Full Name:
    Johnny Mccall
    #21 jonathan.mccall, Feb 18, 2008
    Hi Neil do you think 9" on the front and 10" on the back would work. ie how far do your 8" on the front come out to the wing?
     
  22. jonathan.mccall

    jonathan.mccall Karting

    Jan 25, 2008
    131
    N.Ireland
    Full Name:
    Johnny Mccall
    #22 jonathan.mccall, Feb 18, 2008
    Oops i ment 9" and 11" Do you think they would be too wide compared to yours???
     
  23. MondialNeil

    MondialNeil Formula Junior

    Apr 2, 2007
    427
    Bucks,UK
    Full Name:
    Neil S Perry
    #23 MondialNeil, Feb 25, 2008
    Mine are 8in front and 10 rears, sorry missed that you had made an update to this thread. LOL

    Neil.
     
  24. menoy

    menoy F1 Rookie

    Mar 12, 2005
    2,661
    PL
    Full Name:
    MRodziewicz
    #24 menoy, Feb 25, 2008
    Last edited by a moderator: Sep 7, 2017
    On a bit of a sidenote - at Modena Trackdays last year I saw this Mondial on Challenge wheels. Looked stunning IMO. Food for thought ;).....
    Image Unavailable, Please Login
     
  25. barabus

    barabus F1 Rookie

    Aug 22, 2004
    4,777
    12 Cylinder Village
    Full Name:
    Si
    #25 barabus, Feb 26, 2008
    Have'nt got a clue :D:D:D
     
Page 1 of 3

Share This Page