WHO NEEDS TO CONVERT EURO SPEC TO USA SPEC ? | FerrariChat

WHO NEEDS TO CONVERT EURO SPEC TO USA SPEC ?

Discussion in '308/328' started by lbanez, Mar 5, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. lbanez

    lbanez Rookie

    Joined:
    May 11, 2004
    Messages:
    39
    Full Name:
    Angelo Albanese
    I have the magic box that controls the o2 sensors with the fuel injector hose that goes between the warm up regulator and the fuel distrubutor, have a look at the picture.....I have converted my Euro Spec QV back to a Euro spec, all this was installed to meet the EPA standards , you need to get a new 02 sensor ( I would get both)........easy to install, one wire went to the fuel pump, a ground, 2 wires for the o2 sensors, the wiring for the injector and the resistor is already in place, I know there was an earlier chat, someone was looking for a Johnson box ???, I would say this is a Lambda type setup...the last photo is the back of the box K loop System....if interested email me at [email protected]
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    lbanez, Mar 5, 2008
    #1

Share This Page