Will Fiorano 355 drilled rotors fit on my Berlinetta? | FerrariChat
Buy

Will Fiorano 355 drilled rotors fit on my Berlinetta?

Discussion in '456/550/575' started by edmo7, Dec 6, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. edmo7

    edmo7 Formula Junior

    Jul 8, 2004
    280
    Irvine, CA
    Full Name:
    Ed
    #1 edmo7, Dec 6, 2004
    Does anyone know if the drilled rotors on the 355 Fiorano Edition is the same size as the ones on standard 355's? I have a 1997 355. Thanks!
     
  2. rossi

    rossi Formula Junior

    Feb 6, 2004
    480
    #2 rossi, Dec 7, 2004
    I don't know if they are the same size, but they should fit, as it was possible to order the drilled brake discs only, without the whole Fiorano package.
     
  3. cal355

    cal355 Formula Junior

    Jun 16, 2004
    383
    San Francisco
    Full Name:
    Cal
    #3 cal355, Dec 7, 2004
    Trywww.stillen.com and look at the Sport Rotors for Ferrari.I have a set of both front and rears with the Metat Matrix pads.Alot better than stock.Rotors are Brembos and look like Challenge rotors.Alot less cost than OEM.
     
  4. 355fiorano

    355fiorano Formula Junior

    Oct 21, 2003
    782
    London
    Full Name:
    Philip
    #4 355fiorano, Dec 7, 2004
    Yes they are the same diameter, just drilled.
     
  5. edmo7

    edmo7 Formula Junior

    Jul 8, 2004
    280
    Irvine, CA
    Full Name:
    Ed
    #5 edmo7, Dec 7, 2004
    Are the brembo drilled rotors the exact same thing as the ones direct from Ferrari?
     
  6. cal355

    cal355 Formula Junior

    Jun 16, 2004
    383
    San Francisco
    Full Name:
    Cal
    #6 cal355, Dec 8, 2004
    Brembo supplies Ferrari with OEM for both regular and challenge cars.Drilled rotors for the front look exactly the same.The rears,from Brembo(Stillen),pattern of the holes look different from the OEM that comes on a Fiorano.The holes look alittle bigger.
     

Share This Page