Window ECUs for a GT | FerrariChat

Window ECUs for a GT

Discussion in '456/550/575' started by Lambo5000, May 22, 2023.

Tags:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Lambo5000

    Lambo5000 Rookie

    Oct 6, 2009
    5
    Denmark
    Full Name:
    Michael Blytmann
    Hey guys, hoping for a bit of luck here.

    Ran in to somewhat of a problem. I bought a 456GT a while back where the Windows and c-looking didnt work. ( there was a bill with the sale of the car, from the Ferrari dealer that had diagnosed the existing units and found them not working) I know that they usually Can be restored so wasnt to concerned about this.

    I finally just got around to take it apart and now found that both the ecu’s were completly missing from the doors! I Contacted the po and as according to the bill ,he told me he had them tested at the Ferrari dealership 11 years ago and found them not working. apparently the dealer couldnt get new ones, but offered the po to buy 2 new Doors with all the hardware but at a cost he did not want to go with so he just left it non working.

    He told me he had no idea the dealership discarded them and he did not agree to this!

    So im now in dire need of both Ecu’s. Ig any alternative is known to the original part nbr. 153096 or if you have working/non working ones im open to buy, as they usually Can be restored with a little luck.
    If anyone has a lead to them let me know please. It Will be greatly appreciated
     
  2. scowman

    scowman F1 Rookie

    Mar 25, 2014
    2,547
    Scottsdale AZ
    Full Name:
    Stu Boogie
    Thy gt car parts in AZ. They are a big exotic recycler.
     
  3. Lambo5000

    Lambo5000 Rookie

    Oct 6, 2009
    5
    Denmark
    Full Name:
    Michael Blytmann
    Thanks much appreciated and Will certainly try. Just for anyone else seeing the post, i did try eurospares, allferrariparts and authorized dealer.
     
  4. franschman

    franschman Formula Junior

    Dec 18, 2017
    362
    Holland
    Full Name:
    Bart
    I am working on a replacement part. It's very difficult and will not come cheap, unfortunately.
    Will report if I have a solution.
     
    KrissKross likes this.
  5. Lambo5000

    Lambo5000 Rookie

    Oct 6, 2009
    5
    Denmark
    Full Name:
    Michael Blytmann
     
  6. Lambo5000

    Lambo5000 Rookie

    Oct 6, 2009
    5
    Denmark
    Full Name:
    Michael Blytmann
    Thanks for letting me know, whats the time horizon, i am looking to get replacements as soon as possible and whereabouts would you value them if done?

    regards
    Michael
     

Share This Page