Window Regulator Splined Replacement Part | FerrariChat

Window Regulator Splined Replacement Part

Discussion in '456/550/575' started by Daniel Wanstrath, Apr 7, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Daniel Wanstrath

    Daniel Wanstrath Rookie

    Feb 28, 2015
    15
    Cincinnati
    Full Name:
    Daniel Wanstrath
    #1 Daniel Wanstrath, Apr 7, 2020
    The aluminum splined part that holds both the window regulator arms on my 456 broke a few weeks ago. From what I read this is a common problem where they break or become worn or sloppy? My understanding is that most people bore out the arms and weld a stainless pin in place. I really didn't want to drill out the pieces, try to align them and then weld in place. I decided to see if I could replicate the original in stainless steel. I came up with a spline and bushing that can be pressed in place. Although its a press fit, it also has a center tap if you would like to add a washer and bolt. I have yet to reassemble, but wanted to see what others thought about the design before I finish the repair.
    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
    white out, ferrariformulauno and Qavion like this.
  2. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    38,074
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #2 tazandjan, Apr 7, 2020
    Daniel- Looks like you have eliminated one more weak point.
     
  3. Daniel Wanstrath

    Daniel Wanstrath Rookie

    Feb 28, 2015
    15
    Cincinnati
    Full Name:
    Daniel Wanstrath
    #3 Daniel Wanstrath, Apr 7, 2020
  4. Daniel Wanstrath

    Daniel Wanstrath Rookie

    Feb 28, 2015
    15
    Cincinnati
    Full Name:
    Daniel Wanstrath
    #4 Daniel Wanstrath, Apr 7, 2020
    I got the regulator back in. Window gap looks good. Assuming the stainless splines hold up on the part, it should be a good fix that is easy to install without the need for additional machining and welding.
    Image Unavailable, Please Login
     
    white out and philfrench like this.
  5. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,550
    Sydney
    Full Name:
    Ian Riddell
    #5 Qavion, Apr 7, 2020
    That's a work of art. How many hours did you invest in this? :confused: ... and how many copies will you make for your fellow suffering FChatters? :D

    I'm surprised Hills Engineering UK don't make them.
     
  6. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    38,074
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #6 tazandjan, Apr 7, 2020
    Nice machining on that one and it does not look like it will ever wear out. How much to duplicate for your other V12 buddies?
     
  7. Daniel Wanstrath

    Daniel Wanstrath Rookie

    Feb 28, 2015
    15
    Cincinnati
    Full Name:
    Daniel Wanstrath
    #7 Daniel Wanstrath, Apr 8, 2020
    I've had a little extra time these days! Now that the design is complete and appears to work well, they can be made in quantity.
     
  8. Daniel Wanstrath

    Daniel Wanstrath Rookie

    Feb 28, 2015
    15
    Cincinnati
    Full Name:
    Daniel Wanstrath
    #8 Daniel Wanstrath, Apr 8, 2020
    I haven't looked at the machining cost yet. What do you think is a reasonable price?
     
  9. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    38,074
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #9 tazandjan, Apr 8, 2020
    Daniel- No real clue, but anything under $100 would likely be good.
     
  10. Daniel Wanstrath

    Daniel Wanstrath Rookie

    Feb 28, 2015
    15
    Cincinnati
    Full Name:
    Daniel Wanstrath
    #10 Daniel Wanstrath, Apr 8, 2020
    That's probably around what they would cost. $95 each or $175 for a pair.
     
  11. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    38,074
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    #11 tazandjan, Apr 8, 2020
    Daniel- Should be a market at that price. F1 Imports might even be interested.
     
  12. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,550
    Sydney
    Full Name:
    Ian Riddell
    #12 Qavion, Apr 8, 2020
    Hopefully that's with some profit for you for your efforts?

    Note that several currencies have seriously devalued during the coronavirus (compared to the US dollar). Probably the US will be your biggest market, but having said that, I'm sure a few international folks are desperate for a proper window fix.
     
  13. phil99

    phil99 Rookie

    Feb 26, 2015
    35
    Wellington, NZ
    Full Name:
    Phil S.
    #13 phil99, Apr 16, 2020
    I would be keen to get a couple, even with the exchange rate. Beautiful job!
     
  14. Daniel Wanstrath

    Daniel Wanstrath Rookie

    Feb 28, 2015
    15
    Cincinnati
    Full Name:
    Daniel Wanstrath
    #14 Daniel Wanstrath, Apr 29, 2020
    seatowntom and Qavion like this.
  15. Daniel Wanstrath

    Daniel Wanstrath Rookie

    Feb 28, 2015
    15
    Cincinnati
    Full Name:
    Daniel Wanstrath
    #15 Daniel Wanstrath, Apr 30, 2020
    Currently, if anyone who purchases the parts would like to send me their regulators, I would install them at no charge. I would like to document the install. PM me for details.
     
  16. rviani

    rviani Karting

    Jun 22, 2005
    73
    NJ
    Full Name:
    Ron Viani
    #16 rviani, May 1, 2020
     
  17. rviani

    rviani Karting

    Jun 22, 2005
    73
    NJ
    Full Name:
    Ron Viani
    #17 rviani, May 1, 2020
    In the process of removing my regulator - not sure how to PM - please email me at [email protected]
     
  18. Daniel Wanstrath

    Daniel Wanstrath Rookie

    Feb 28, 2015
    15
    Cincinnati
    Full Name:
    Daniel Wanstrath
    #18 Daniel Wanstrath, May 1, 2020
    My email address is [email protected]. Thanks!


    Sent from my iPhone using FerrariChat
     
  19. Prit Singh

    Prit Singh Karting

    May 29, 2017
    96
    London
    #19 Prit Singh, Jul 13, 2020
    Hello Daniel my car seems have developed this gap. Are these bushings still produced?

    Thanks

    Prit
     
  20. Daniel Wanstrath

    Daniel Wanstrath Rookie

    Feb 28, 2015
    15
    Cincinnati
    Full Name:
    Daniel Wanstrath
    #20 Daniel Wanstrath, Jul 21, 2020
    Yes. They take 10 days from the order date to produce. If you are interested, please send an email to [email protected]
     
  21. seatowntom

    seatowntom Rookie

    Jan 14, 2021
    8
    Seattle, WA, USA
    Full Name:
    Tom Feldman
    #21 seatowntom, Sep 9, 2021
  22. Davidspop

    Davidspop Formula Junior

    Dec 23, 2019
    394
    Full Name:
    Lance Malcolm
    #22 Davidspop, Sep 10, 2021
    Mine worked awesomely and easy to install following Dan's instructions... I just now need to make minor adjustments but gap is exponentially better than it was!
     
    seatowntom likes this.

Share This Page