Worn engine mounts 308? | FerrariChat

Worn engine mounts 308?

Discussion in '308/328' started by Andreas Engesvik, Oct 31, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Andreas Engesvik

    Mar 4, 2020
    148
    Oslo, Norway
    Full Name:
    Andreas Engesvik
    The exhaust manifold snapped just before the joint on the silencer. The exhaust is original for on my euro gtb 77 modell. I suspect that the engine mounts are worn - my son wiggled the engine last night - seems to be gone?
     

    Attached Files:

  2. Andreas Engesvik

    Mar 4, 2020
    148
    Oslo, Norway
    Full Name:
    Andreas Engesvik
    I am not sure if it was possible to see the movie? Anyway yesterday day I used a jack to see how the engine moved - carefully without disconnecting the shift bar and the top engine support (pointing against the luggage compartment) I noticed that one of the mounts moved 15 mm before lifting the car itself - the others were more like 5 - 8 mm. The mounts are expensive but I guess it is best to renew them all.
     
  3. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,553
    San Carlos, CA
    Full Name:
    Mitchell Le
    I have never seen new ones move that much, or that noisy.
     
    Andreas Engesvik likes this.
  4. Andreas Engesvik

    Mar 4, 2020
    148
    Oslo, Norway
    Full Name:
    Andreas Engesvik
    I guess they are as old as the car - this one is the rear right corner. Need to be changed apparently.
     

Share This Page