X-pipes, spacers, K&N filter in Europe ? | FerrariChat
Buy

X-pipes, spacers, K&N filter in Europe ?

Discussion in '456/550/575' started by AndersJL, Oct 31, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. AndersJL

    AndersJL Formula Junior

    Apr 16, 2001
    376
    Sweden
    Full Name:
    AL
    #1 AndersJL, Oct 31, 2007
    I am about to start my winter project, by fitting X-pipes, K&N air filter and maybe wheel spacers (15 & 25 mm) on my 550 -2000.
    Does anyone know where I can find these parts at reasonable price here in northern Europe ?
    Regards Anders
     
  2. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,665
    South East
    Full Name:
    Jimmie
    #2 greyboxer, Oct 31, 2007
    Spacers are made by Hill Engineering in UK - K&N seem readily available here too - don't know about pipes but if you mean x-ost try Scuderia Sales in UK
     
  3. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    Dec 7, 2003
    16,448
    Winston Salem, NC
    #3 Ricambi America, Oct 31, 2007
  4. AndersJL

    AndersJL Formula Junior

    Apr 16, 2001
    376
    Sweden
    Full Name:
    AL
    #4 AndersJL, Nov 1, 2007
    Many thanks for the info.
    I don´t want to sound greedy, but before spending the money I would like to understand what I am buying:
    How come that just some "pipes" can cost so much ?
    As I understand, the pipes are "clean" inside, i.e. no sound deadning material, right ?
    OK, they are of stainless steel, but besides that....?
    And, yes, it is handmade....
    But what else is there to it ? Can anyone explain for my better understanding ?
     
  5. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    Dec 7, 2003
    16,448
    Winston Salem, NC
    #5 Ricambi America, Nov 1, 2007
    The HyperFlow pipe is unique because it is a 3 part construction, designed specifically for flexibility and adjustments during installation. Moreover, the location of the cross-over point is not accidental -- HyperFlow probably worked through 30 different versions/configurations until they achieved the sound level (and more importantly, the throttle response and feel) they wanted. Finally, it is indeed a hand made item (one-by-one), and highly polished.

    There are indeed other choices available in the market. After evaluation many different brands, we feel the HyperFlow version offers the best product for our customers. (And yes, some of our other primary suppliers make an X-pipe. We had plenty to chose from, but selected the HF.)
     
  6. AndersJL

    AndersJL Formula Junior

    Apr 16, 2001
    376
    Sweden
    Full Name:
    AL
    #6 AndersJL, Nov 1, 2007
    Ok, that makes sence.
     
  7. BB456MGT

    BB456MGT Karting

    Aug 22, 2005
    86
    Boston, MA
    Full Name:
    Konstantinos
    #7 BB456MGT, Nov 1, 2007
    BMC: http://www.bmcairfilter.com/

    BMC: Official Ferrari Sponsor

    ...as good, or better than K&Ns.

    Noticeable difference in performance.

    Good luck!
     
  8. caspian575

    caspian575 Karting

    Jun 12, 2007
    154
    Cheshire UK
    Full Name:
    Roger Hayes
    #8 caspian575, Nov 3, 2007
    Why are you fitting X pipes - for better performance or more noise?

    I fitted Tubi back boxes this summer to my 2003 575, sound is excellent especially in SPORT mode when the car blips its own throttle as it shifts down. But I must admit that I have lost some rolling speed driveability compared to the original boxes which has restriced outlet until the valves / gates opened, you have to learn to use a real light throttle if you don't want it to kangaroo - like when you are stuck in traffic on the M6 and you are rolling along the throttle is so precise that it is very hard not to have it bunny hopping down the carriage way. But I can put up with that for the pleasure of listening those gases exiting the back end.

    Enjoy!
     

Share This Page