| Author |
Message |
Izel K. (Ferrarist)
Member
Username: Ferrarist
Post Number: 313
Registered: 3-2001
| | Posted on Tuesday, October 28, 2003 - 4:55 am: | |
Hi Crusing,
This was discussed here before. See the links below, they'll be useful.
http://www.ferrarichat.com/discus/messages/256120/159958.html
http://www.ferrarichat.com/discus/messages/251280/178131.html |
Dennis (Bighead)
Member
Username: Bighead
Post Number: 268
Registered: 2-2003
| | Posted on Monday, October 27, 2003 - 11:04 pm: | |
Careful, as the airbags and the airbag system may not be the same, even if you could mount the 360 wheel.
FWIW, I took out the wheel in my 355, and replaced it with a Momo suede racing wheel (non-airbag), as I strongly preferred telescoping the wheel closer to me (I'm tall and have to drive with the seat reclined and like having the wheel closer to me). I needed a special spacer to adapt the four hole spline to the standard 6 hole wheel mount.
vty,
--Dennis
|
Hubert Otlik (Hugh)
Intermediate Member
Username: Hugh
Post Number: 1612
Registered: 1-2002
| | Posted on Monday, October 27, 2003 - 6:09 pm: | |
check the part #'s b/w the 355 steering column and the 360; if they both have the same # of splines, the 360 wheel should fit w/ out issue. |
Crusing (Crusing)
Junior Member
Username: Crusing
Post Number: 122
Registered: 10-2002
| | Posted on Monday, October 27, 2003 - 5:57 pm: | |
Is it possible to swap the 355 Wheel with the 360? I like the three spoke 360 wheel much more. Seems like the three spoke is more traditional. I realize the swap may be cost prohibitive! |