Author |
Message |
James Pai (Jaymus)
Junior Member Username: Jaymus
Post Number: 102 Registered: 2-2001
| Posted on Tuesday, August 26, 2003 - 3:51 pm: | |
I have the 512TR rims on my 90 TR. You need some sort of offset, and new bolts. Also the rears had to be drill a little more to allow the 512 bolts to clamp tight. I got mine off Henry on the board. He sold me his rims. |
Paul Hill (348paul)
Member Username: 348paul
Post Number: 360 Registered: 12-2002
| Posted on Thursday, August 14, 2003 - 12:16 pm: | |
Thanks Steve. You should have an email from me regarding the Ti. Paul |
Steve Magnusson (91tr)
Intermediate Member Username: 91tr
Post Number: 2025 Registered: 1-2001
| Posted on Wednesday, August 13, 2003 - 11:28 am: | |
NOS = New Old Stock |
Ron (Easy_rider)
Member Username: Easy_rider
Post Number: 669 Registered: 12-2002
| Posted on Wednesday, August 13, 2003 - 11:26 am: | |
Thanks Steve. BTW, what's NOS? |
Steve Magnusson (91tr)
Intermediate Member Username: 91tr
Post Number: 2024 Registered: 1-2001
| Posted on Wednesday, August 13, 2003 - 11:22 am: | |
Ron -- No I don't, other than to post a WANTED ad here and at FerrariList and hope someone has one to sell. (I can't recall whether it was something here or thru FList that I got mine, but it was a case of someone selling a small bunch ~50?~100? of NOS issues). |
Ron (Easy_rider)
Member Username: Easy_rider
Post Number: 666 Registered: 12-2002
| Posted on Wednesday, August 13, 2003 - 11:06 am: | |
Steve, do you know of any way I could get a copy of that book? I tried a search at Amazon and got no matches. Thanks, Ron |
Steve Magnusson (91tr)
Intermediate Member Username: 91tr
Post Number: 2022 Registered: 1-2001
| Posted on Wednesday, August 13, 2003 - 10:10 am: | |
Paul -- the latest values I have are: TR (measured on SN 87406) front offset = +34.2 mm front lug bolt straight length (unthreaded + threaded) = 46 mm front lug bolt projection past wheel mounting surface = 22 mm rear offset = +59.6 mm rear lug bolt straight length (unthreaed + threaded) = 46 mm rear lug bolt projection past wheel mounting surface = 22 mm 512TR (scaled from drawings in GB Progetti No. 10 Jan/Feb 1992) front offset = +46 mm front lug bolt straight length (unthreaded + threaded) = 52 mm front lug bolt projection past wheel mounting surface = 22 mm rear offset = +81.2 mm rear lug bolt straight length (unthreaed + threaded) = 52 mm rear lug bolt projection past wheel mounting surface = 22 mm but you might not want to exactly match rear tire centerlines -- see: http://www.ferrarichat.com/discus/messages/256120/702.html PS I was expecting to hear from you regarding the Ti? |
Paul Hill (348paul)
Member Username: 348paul
Post Number: 358 Registered: 12-2002
| Posted on Tuesday, August 12, 2003 - 5:09 pm: | |
512TR Wheels on a Testarossa? Are there any TR owners here that have put 512TR wheels on their TR ? I have been given two sources of info that slightly contradict each other - Hence my question to the board! I would need the width of the spacers (front & rear) and also the lug bolt length. As always � any answers greatly appreciated Paul
|