Battery positive terminal in boot | FerrariChat

Battery positive terminal in boot

Discussion in '206/246' started by Angus Fowler, Oct 16, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Angus Fowler

    Angus Fowler Rookie

    Joined:
    Jul 4, 2019
    Messages:
    13
    Full Name:
    Angus Fowler
    Hi. I’m fitting a dinoparts ignition to my 1973 246 and apparently there is a battery positive terminal in the boot but for the life of me I can’t find it. Any pointers would be appreciated.
     
    Angus Fowler, Oct 16, 2022
    #1
  2. Ken Ivey

    Ken Ivey Formula Junior Silver Subscribed

    Joined:
    Jan 6, 2013
    Messages:
    256
    Location:
    Portland, OR, USA
    Full Name:
    Ken Ivey
    I'm not aware of any such factory terminal in the boot. I had a MSD unit for a while that required a direct, positive and negative feeds. I ran them from the battery through the tubing used for the clutch cable tube, through the engine compartment and to the boot. I protected the wire so vibration wouldn't wear through the insulation.

    Ken
     
    Ken Ivey, Oct 16, 2022
    #2
  3. Angus Fowler

    Angus Fowler Rookie

    Joined:
    Jul 4, 2019
    Messages:
    13
    Full Name:
    Angus Fowler
    Thank you so much Ken.
     
    Angus Fowler, Oct 17, 2022
    #3

Share This Page