Does anyone know if the little white plastic blocks that separate the fuel injection hard lines can be replaced/found anywhere. Two of mine are cracked and I would like to replace them for assethetics if nothing else.
There is a thread in the 308 section here on this subject I believe there were two styles, i remember seeing it a month or so ago. I will check
I think this is it. Titled. What ignition wire clip did i get http://www.ferrarichat.com/forum/308-328/446402-what-ignition-wire-clip-did-i-get.html
No Sean, but thanks. I am talking about the clear/white plastic square blocks that sit between the fuel injector hard lines going to the intake...up by the air manifold.
There's a thread on here somewhere Someone made them here for us. I bought a set. Twist my arm & I'll find it.
I have an unused set. Made by an fchatter of a material that doesn't crumble. When all else fails read the damn manual. - wife
This is the thread you are talking about: http://www.ferrarichat.com/forum/308-328-sponsored-yellow-compass-group/318107-i-made-some-new-plastic-fuel-line-clips.html I have ordered these and they are awesome.
That thread is over 4 1/2 years old. Not sure how I missed that discussion but if Steve 48 is still making these I would be up for two sets for both my cars. Will try to drop him a private p.m. later today, haven't heard much from him over the last year. Either way, very nice work indeed!
Hi Steve, I broke mine also putting in new injectors, is this the same as in your old thread, please see photo, if it is count me in please, will send you a PM shortly It on my 1989 328 Image Unavailable, Please Login
oh yeah. I do all of the clip types. Hold tight everyone. i'll get back to your PMs. i need to make a new mold and get some supplies so this will take about a month before i start getting your clips out to you.
I dont have the number handy but our local mercedes dealer got them from mercedes for me (the dealer didn't stock them). Just suggest a 500SEL from the 80's and away you go.
I have the MB clips. They are 100 times better, much more robust, than the F-Car OEM crap. BUT they do not make the 4-liner square clip. You have to fab that from two 2ers. Follow? With the new material Steve is using, I'm going with his.
I'll have to check but IIRC, I got the straight-line 2, 3 and 4 line clips. The block or cube 4-line clips, would have to be fabricated.
the MB clips are good but dont look the part. the color and shape is off. mine are just Iike the originals because they are cast from originals. color is the same too. In fact, a local ferrari service and restoration shop chosee to stock my clips over the competitor.
