Are fog lights (US spec) interchangeable between GT4 and any other iteration of 308/328? I couldn't turn anything up with a search. Thanks. Jack
Theorethically Yes, no problem, but that would be not original, because the GT4 has had the Carello Fogs and the GTB/GTS has had the Cibiè Fogs. Image Unavailable, Please Login Image Unavailable, Please Login
Dust boot and seal for front caliper is same as that which fits a 1985 5 series BMW. Rock Auto has them for $3.16 per caliper.
Hello everybody, Can someone help me out sourcing a double wired capacitator, or at least now the part number (or market equivalent). Superformance in the UK only have the single wired ones at stock. Thanks, Ricky Image Unavailable, Please Login
1976 308GTB Radiator Fan Motor Brush Set The same brush set is used in the Jaguar V12 XKE. Lucas part number 54770693. I was able to locate one at XKs Unlimited. Jaguar Parts I British Aftermarket Car Catalog Parts I XKS Parts
HI as the title says im looking for a pair of QV door wiring harnesses for the mirrors. needs to be a right hand drive as the passenger mirror is electric. thanks
I haven't used this (I got mine from Cicognani many years ago) but it looks about right and is a fraction of the price: Flocked Window Trim Drip Seal Per Metre - Car Builder Solutions - Kit Car Parts and Accessories Image Unavailable, Please Login
If you strip out the gearbox fill plug hole , Dorman makes one with longer threads. Found at local auto parts. It uses a 3/8 ratchet to tighten instead of hex. Image Unavailable, Please Login
A direct replacement for this union is: Dixon 179-1212 Brass Hose Splicer Fitting, Tee, 3/4" Hose ID Barbed. I just purchased mine from Amazon (see below) and it's a perfect fit for the 19mm hose and it's only $11.84. Being brass, it's heat resistant and won't rust, a three-fer. https://www.amazon.com/gp/product/B00835HWRS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Robert D G ,I just start to give a good face lift to my ferrari 1980 308 GTSi carpets seats etc.. i noticed my hard top sides rubber moldings( Removable roof) are worn out looking for new as anybody know where to get them. a reply appreciated Thanks.
The PTFE coated (one side) thrust washer 22x38x1.5mm with pin hole. 8 pcs used per car Location rear hub joint on wishbone These are standard off the shelf items: Industry pn: WC20DU available as low as $ 2.37 ea for 37 pcs Global Machine has them in stock $4.37 each. Algar has them at $17.10 each Mr Fiat $42.00 each
106769 Differential on my 1982 308GTSi. The 4 friction disks and 4 spacer disks. I found them to be the same as from a 188 BMW differential. I found a seller who makes for his BMW race team. Belgrad Serbia. Much less then Porsche disks.
I have a 1985 308 QV GTS US car... does anyone know where I can get the following air injection system parts? I need them and preferred new. 1. differential pressure switch 2. Cut-Off valve 3. Solenoid Valve Not sure but someone tell me if GM made any of these parts? If so they're I'm sure much cheaper than some of the Ferrari part houses what they want for them! Also any other cross-over from other vehicles that used the same parts? VW, Porsche, etc... Thx Rob
The wishbone bushing insert PTFE coated sleeve where the hub meets the wishbone is a standard off the shelf item. 701064 or ZU MB2025ZU approx $1.40 Ea 20x23x25mm Press out the old press in the new one. Ferrari Dealer $16.25
RockAuto sells them. I rebuilt my fronts due to car pulling to one side during braking. No more pulling to one side. Fronts cross reference to a BMW. Rears do not. Hence they cost 7 times as much.
You kind of need to provide the exact year and model of BMW for a cross reference to be useful... or the brand and part number of the repair kit you bought?
Does anyone have the dimension for the replacement collet sleeve? The sleeve can be pressed out and a new $4.00 sleeve pressed in. It is the exact same type as the (hub / wishbone) joint on the rear suspension. Measure is id and length. It is the bottom item in photo Image Unavailable, Please Login
M22 x 1.5 core plugs: Aluminium $8.79 Hex Plug - M22x1.5 Aluminum - OE NOS Brass GBP1.80ea for 10 Brass Internal Hex Male Metric Blanking Plug - Engineering Image Unavailable, Please Login
This bearing is standard PN N2206 (30x62x20) Any bearing house has them got mine for $38. I have seen these advertised for a range of $275-$498 Removable outer race. As a last resort there is a NU2206 more readily available the NU2206 is same bearing only with a removable inner race. Both are available with standard steel cage or optional bronze/brass cage.