Major service on my 348 | Page 2 | FerrariChat

Major service on my 348

Discussion in '348/355' started by Cauf61, Jan 2, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
    Ajax de 1e, Fumacher and fedgery77 like this.
  2. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
    Anybody has a good idea what the weight of this complete subframe is ? 350-400 kg ?
     
  3. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
    Cam belt tension ; do you rely only on the tensioner , measure the tension of just the old 90° twist method ?
     
  4. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
  5. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
    36 mm Crankshaftbolt looks going to be an PITA.
     
  6. AceMaster

    AceMaster Three Time F1 World Champ

    Joined:
    Feb 6, 2009
    Messages:
    34,790
    Location:
    Ontario, Canada
    Full Name:
    Mike
    Why? An air gun should zip that off no sweat
     
    SoCal1 likes this.
  7. SoCal1

    SoCal1 F1 Veteran Owner

    Joined:
    Jun 14, 2011
    Messages:
    8,636
    Location:
    SoCal LA/OC/New Mexico
    Full Name:
    Tim Dee

    I used an air chisel on my diesel, couple pops loosened it right up.
     
  8. itsablurr

    itsablurr Formula 3 Silver Subscribed

    Joined:
    Dec 9, 2005
    Messages:
    1,016
    Location:
    Carlisle, MA
    Full Name:
    Matt
    Milwaukee M18 Fuel 1/2" cordless impact driver will make very quick work of that bolt. 1100 lbft breakaway torque.
     
  9. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
  10. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
    Last edited: Jan 20, 2018
  11. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
    Oil pan is difficult to get loose. You only have to remove all the 13 , 10 and 17mm bolts yes. Not famous copper bolt on the bottom of the oil tank.
     
    magisano likes this.
  12. seabass23

    seabass23 Karting

    Joined:
    Nov 6, 2016
    Messages:
    156
    Location:
    St Albert, Alberta
    Full Name:
    Matt
    So what part of the job is difficult? Thinking of dropping mine to reseal with Hondabond.

    Sent from my Pixel XL using Tapatalk
     
  13. margarita

    margarita Formula 3

    Joined:
    Mar 20, 2011
    Messages:
    1,618
    Location:
    usa
    nice job
     
    13DM likes this.
  14. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
    Getting the bond loose was PITA. It took a very, very long time carefully breaking it with pulsating force with a 2 meter long small wooden beam and a lot of WD40. All very carefully.


    Image Unavailable, Please Login
     

    Attached Files:

  15. seabass23

    seabass23 Karting

    Joined:
    Nov 6, 2016
    Messages:
    156
    Location:
    St Albert, Alberta
    Full Name:
    Matt
    I see. Sounds like yours was properly sealed. I doubt mine is since it is currently leaking from a few different spots!

    Sent from my Pixel XL using Tapatalk
     
  16. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
  17. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
    And don't forget to undo the gearbox connection part. ( like i first did )
     
  18. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
    I also found something very strange on the bottom tensioner. Look very carefully but i think the fixed arm should be on the other side from the spring arm. Not ?
    The fixed arm seems also bended. I will look in to it this evening.
     
  19. margarita

    margarita Formula 3

    Joined:
    Mar 20, 2011
    Messages:
    1,618
    Location:
    usa
    Can you post more pictures of how to trow down the engine please thanks
     
  20. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
  21. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
  22. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
  23. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
    steved033 likes this.
  24. Cauf61

    Cauf61 Formula Junior

    Joined:
    Jul 12, 2016
    Messages:
    557
    Location:
    Belgium
    Full Name:
    Patrick
  25. m.stojanovic

    m.stojanovic F1 Rookie Silver Subscribed

    Joined:
    Dec 22, 2011
    Messages:
    3,314
    Location:
    Serbia - Niš
    Full Name:
    Miroljub Stojanovic

Share This Page