360 Challenge Stradale Rear Deck Lid 'Swap'? | FerrariChat

360 Challenge Stradale Rear Deck Lid 'Swap'?

Discussion in '360/430' started by Scrappydog, Aug 6, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 1 of 2
  1. Scrappydog

    Scrappydog Rookie

    Feb 7, 2014
    35
    #1 Scrappydog, Aug 6, 2018
    I’m looking to finish off the 'CS look' on my 360 and I’m struggling to find a decent solution to getting the right rear deck lid spoiler.

    Prosport in the UK used to do a rear deck-lid add-on piece, but it seems to be discontinued. Sourcing a complete CS rear bonnet is proving difficult and/or very expensive.

    Does anyone know if I can utilize an OE CS rear bonnet hood structure (which has the correct deck lid) and graft / re-use all my existing std 360 rear bonnet hood parts?

    I'm sure there will be the odd fixture/fitting/bracket that won't be right, but if by-and-large I can reuse the glass, side-vents, etc. that would make the project cheaper; as I'm really after the additional (albeit marginal) aero benefit the decklid gives me, without resorting to a spoiler. I also have the CS front and rear bumpers and side-skirts to it will finish off the exterior profile nicely. But the exercise is not really to save weight, so I'm happy to re-use the metal frames not use carbon-parts.

    Andy

    PS. I've seen a few f430 challenge rear bonnet hoods for sale - am I right to assume the f430 rear bonnet hood is a different size to the 360?
     
  2. timwu12

    timwu12 Formula Junior
    Silver Subscribed

    Oct 31, 2014
    919
    TX
    #2 timwu12, Aug 6, 2018
    Hit up Fchat user: rizzo308

    He has or had a fiberglass add on piece for the rear decklid
     
    02360spider likes this.
  3. becausephilchow

    becausephilchow Formula Junior

    Aug 26, 2016
    543
    Hong Kong
    #3 becausephilchow, Aug 6, 2018
    ProSport still has their Deck-Lid, mine is from ProSport. Took a bit of massaging to get it to fit well from the body-shop, but, that's normal with FRP Parts. Any good body-shop will be able to make it look good.

    Rizzo308 also has one too.

    Impossible to find a complete CS Rear Bonnet.
     
  4. Scrappydog

    Scrappydog Rookie

    Feb 7, 2014
    35
    #4 Scrappydog, Aug 7, 2018
    Ok, it’s not showing on their website. I will give them a call.

    BTW; I’m not looking to get a complete rear deck lid, just the main structure (part no.
    67361311) and swap my other bits over.
     
  5. rizzo308

    rizzo308 F1 Rookie
    Silver Subscribed

    Sep 12, 2004
    2,693
    Perth, Australia
    Full Name:
    riggio
    #5 rizzo308, Aug 8, 2018
    S dog PM sent. M
     
  6. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    #6 RANDY6005, Aug 14, 2018
  7. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    #7 RANDY6005, Aug 14, 2018
    I have been looking for almost two years now .
     
  8. jg360

    jg360 Formula Junior
    Silver Subscribed

    Feb 8, 2018
    319
    New Jersey
    Full Name:
    John Gurrieri
    #8 jg360, Feb 7, 2019
    juju1bad, patina, AndreB and 3 others like this.
  9. Ingenere

    Ingenere F1 Veteran
    Owner Silver Subscribed

    Dec 11, 2001
    6,344
    On the Limit
    Full Name:
    Dino
    #9 Ingenere, Feb 7, 2019
    If you are going to all this trouble, why wouldn't you get the perspex window, etc, and do it properly?
     
    RANDY6005 and Dewinator like this.
  10. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    #10 RANDY6005, Feb 8, 2019
    I you are going to use Lexan rear glass you are going to need carbon fiber struts and CS carbon fiber grills and the mounts for carbon fiber grills are not the same
    Image Unavailable, Please Login
     
  11. Ingenere

    Ingenere F1 Veteran
    Owner Silver Subscribed

    Dec 11, 2001
    6,344
    On the Limit
    Full Name:
    Dino
    #11 Ingenere, Feb 8, 2019
    The grills are not carbon fiber. The cross braces are. But that's part of doing it properly.
     
    RANDY6005 likes this.
  12. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    #12 RANDY6005, Feb 8, 2019
    Okay the louvers around the Lenax glass I call the them grills
    art Information: COMPLETE L.H.GRILL SUPPORT.
    Part Number: 67670600
    Online Price: $2292.36

    Diagram Association #: 011a
    Click here to view all vehicles with this part.
    1


    Engine Bonnet : 112
     
  13. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    #13 RANDY6005, Feb 8, 2019
  14. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    #14 RANDY6005, Feb 8, 2019
  15. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    #15 RANDY6005, Feb 8, 2019
    And number part number six is deleted on the CS cars Part Number: 65398800
    Online Price: $283.34
     
  16. sherrillt

    sherrillt Formula 3
    Rossa Subscribed

    Jan 1, 2009
    1,082
    Northern Virginia
    #16 sherrillt, Feb 9, 2019
    Anyone with firsthand visual perspectives or comparison (material/composition and fit) between ProSport and Rizzo's kit or are they the same parts different vendor?
     
  17. Aintqik

    Aintqik Karting

    Mar 15, 2017
    163
    South Jersey
    Full Name:
    RJ Cilurso
    #17 Aintqik, Jun 4, 2019
    I’m working with a Prosport now. I’ll post updates on how it goes.

    I’ve got no desire to fill the brake light, I don’t own a CS. Just like the look, not trying to pretend.
    Image Unavailable, Please Login
     
  18. becausephilchow

    becausephilchow Formula Junior

    Aug 26, 2016
    543
    Hong Kong
    #18 becausephilchow, Jun 4, 2019
    EnergyTrader, one4torque, Stealthssfc and 2 others like this.
  19. 360trev

    360trev F1 Rookie
    Project Master

    Oct 29, 2005
    4,252
    Gibraltar
    Full Name:
    360trev
    #19 360trev, Jun 4, 2019
    Great picture
     
  20. jg360

    jg360 Formula Junior
    Silver Subscribed

    Feb 8, 2018
    319
    New Jersey
    Full Name:
    John Gurrieri
    #20 jg360, Jun 5, 2019
    360trev likes this.
  21. Ghostdiver

    Ghostdiver Formula 3
    Silver Subscribed

    Mar 18, 2005
    1,326
    Southeast Texas
    Full Name:
    Wally Hollar
    #21 Ghostdiver, Jun 5, 2019
    Just for clarification, a "true" CS rear deck does have the third brake light cutout, since this has been mandated on US cars since 1986. Not sure if the Euro spec CS's have it or not, but on this side of the pond, it was required. I've never seen one filled in but that does look impressive and takes some talent to pull off!
     
  22. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    #22 RANDY6005, Jun 6, 2019
  23. Mr. Uy

    Mr. Uy Formula Junior
    Silver Subscribed

    Apr 23, 2020
    303
    Fort Worth, TX
    Full Name:
    Charlie U
    #23 Mr. Uy, Nov 10, 2021
    Sorry to revive an old thread - curious if anyone has tried the ProSport or other option on a Spider, as the decklids are different
     
  24. sherpa23

    sherpa23 F1 Veteran
    Owner Rossa Subscribed

    May 28, 2003
    9,992
    Rocky Mountains
    Full Name:
    Bastuna
    #24 sherpa23, Nov 10, 2021
    I'm a little late to this thread but I bought a whole OEM CS decklid with the Lexan, braces, grilles, all of it from Eurospares. I also got CS skirts and other parts from them previously. It's worth looking.
     
  25. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    #25 RANDY6005, Nov 11, 2021
    Wend did you buy it from Eurospares ?
     
Page 1 of 2

Share This Page