Can anyone Identify these tall Ferrari wheel bolts | FerrariChat

Can anyone Identify these tall Ferrari wheel bolts

Discussion in '308/328' started by robertgarven, Dec 6, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. robertgarven

    robertgarven F1 Veteran
    Owner

    Feb 24, 2002
    5,269
    Ventura, California
    Full Name:
    Robert Garven
    #1 robertgarven, Dec 6, 2019
    Friends,

    I have a extra set of rear wheel bolts for a Ferrari, but they are taller than the standard 308 bolts. I was hoping someone could identify their application so I could get them to someone who could use them. Of course they are 22mm head and 14x1.50 thread but the head is 23mm tall as opposed to a regular bolt of 18mm.

    Thanks,

    Rob
    Image Unavailable, Please Login Image Unavailable, Please Login
     
  2. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    34,119
    Austin TX
    Full Name:
    Brian Crall
    #2 Rifledriver, Dec 6, 2019
    Probably rears from 88 1/2-89 328
     

    Attached Files:

  3. robertgarven

    robertgarven F1 Veteran
    Owner

    Feb 24, 2002
    5,269
    Ventura, California
    Full Name:
    Robert Garven
    #3 robertgarven, Dec 6, 2019
    Brian! You Rock! Although those a just a bit taller?
     
  4. robertgarven

    robertgarven F1 Veteran
    Owner

    Feb 24, 2002
    5,269
    Ventura, California
    Full Name:
    Robert Garven
    #4 robertgarven, Dec 6, 2019
    I think the guy I got these from had a few older Dinos. Could they be a 246 rear bolt also?
     
  5. TonyL

    TonyL F1 Rookie

    Sep 27, 2007
    3,838
    Norfolk - UK
    Full Name:
    Tony
    #5 TonyL, Dec 7, 2019
    look like dino 246 wheel bolts to me
     
  6. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    34,119
    Austin TX
    Full Name:
    Brian Crall
    #6 Rifledriver, Dec 7, 2019
    All the 246 bolts I have been able to see a picture of looked like the standard shorter head and that is all I remember as well. If the length is correct I wouldn't be surprised if someone had put the taller heads of so they stuck out of the hub cap further.

    Late 328 rear needed those on the rear so they would look the same as the fronts.
     
  7. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    12,662
    San Carlos, CA
    Full Name:
    Mitchell Le
    #7 yelcab, Dec 7, 2019
  8. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    12,662
    San Carlos, CA
    Full Name:
    Mitchell Le
    #8 yelcab, Dec 7, 2019
    want to get rid of those Rob?
     
  9. TonyL

    TonyL F1 Rookie

    Sep 27, 2007
    3,838
    Norfolk - UK
    Full Name:
    Tony
    #9 TonyL, Dec 7, 2019
  10. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    12,662
    San Carlos, CA
    Full Name:
    Mitchell Le
    #10 yelcab, Dec 7, 2019
    Rob, those do look like 328 bolts.
     
  11. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    34,119
    Austin TX
    Full Name:
    Brian Crall
    #11 Rifledriver, Dec 7, 2019
    Which 328? Early and late had different bolts.
     
  12. TonyL

    TonyL F1 Rookie

    Sep 27, 2007
    3,838
    Norfolk - UK
    Full Name:
    Tony
    #12 TonyL, Dec 7, 2019
    non abs

     

Share This Page