Let's find a way to replicate the 355-360 cf seats??

um, this was supposed to be easy. Mechanicals issue has been solved (minus one part) We just need someone to produce them. If nobody is interested they can rot on my shelf for another decade.

 

The shells are the easy part .

Upholstery is not my specialty, but the little I do know, to reverse engineer it, one would have to take the seat cover apart and unstitch it to get the patterns to exact spec. The foam support needs to also be replicated exactly somehow. These measures will help ensure a tight fit. If the job starts looking baggy, loose, wrinkly, it's a no-go for me.

If Jeff Segal (Modificata) is willing to divulge the source he uses for upholstery, we might run into some luck if the shop still has the foam and fabric patterns. If not, we'll have to look for a seat to take apart. I'm going to have to send him a message and see what he says.

 

Care to tell us more about anything you saw interesting at the seat assembling factory?

 

For the F40 seat, Rob O'Rouke in the UK has the seat shells, pre-moulded seat foams and rolls of the correct red fabric (from memory it came in 4 slight weave/shade variations over the life of the F40, he has the variations)

Ferrari F40 — O'Rourke Coachtrimmers & Supplies
Image Unavailable, Please Login

 

World Upholstery in the L.A. area lists a kit specifically for the 355 sport seat, so should have the pattern.

https://worlduph.com/ferrari/seat_upholstery/

 

I’d much rather prefer these seats in the 355 to be honest. Especially if F40 just bolt right up.

 

Superb find! I will contact them to see if they have the foam patterns. I doubt it, but we’ll see.

 

A few possible upholstery sources mentioned here.

https://www.ferrarichat.com/forum/threads/348-355-seats-challenge-wanted-or-factory-cf-wanted.619960/page-2

 

Sample of F40 seats in Connolly leather.




Image Unavailable, Please Login

 

Update: Jeff’s source no go. Said he used a local shop in Miami, but looking to get the work redone by someone else.

I’m still waiting for a response from O’ Rourke.

 

These seats only came in one size correct?

 

As far as I know, yes.

The 360 though I'm pretty sure was available in multiple sizes.

 

The 360 carbon seats came in S-M-L

Robb

 

Fun fact: I’ve seen as early as 1998 cars equipped updated carbon sports seats that were manufactured in the “correct” 3K Plain weave pattern, whereas they were manufactured in 3K Twill weave before.

The reason I say plain weave is correct is because every other carbon bit available for the 355 (and Ferraris in general) were all offered in plain weave.





Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Madturk mentions there are different sizes? Anyone want to confirm this?

 

My understanding in F40 was S-M-L. I would assume that applied to 355 as well. I remember seeing a set on here for sale before described as large. That is “wiki” knowledge based statement and not one of direct fact


Sent from my iPhone using Tapatalk

 

^ Yes I'm a fan of the plain weave. 550 Maranello version fits as well but they aren't easy to find either.

Image Unavailable, Please Login

 

Was there any indication of a size?

 

Don’t do this to your carbon sport seats.

https://www.ferrarichat.com/forum/threads/carbon-sport-seat-355.526150/

 

FlyingHaggis ended up redoing these and putting them in his 360.



Image Unavailable, Please Login

 

Alot has changed in 5 years

 

Has anyone tried fitting OEM sports seats on Spider?
I read that OEM sports seats were not offered on Spider and looking at the parts diagram, I can see why so.
The back harness is fixed to the seat itself (Spider) because room needs to be cleared when top is down.

Love to hear your thoughts on how complicated process would be (mounting OEM sports seats to Spider).

 

I don’t know much about Spiders, but there is one more issue. Arent Spider seats electric? Gtb/s are not. Something about when you close the softtop, your seats move forward a bit to clear? Probably a smaller issue, but something to look into.

 

Yes they are electronic and yes softtop system moves them as part of opening/closing roof process.
I am thinking if sports seats can be mounted on the existing rail so seats can still move after installation, retaining as much originality.

Thanks,