Type of fastener 360 | FerrariChat

Type of fastener 360

Discussion in '360/430' started by TxJack, May 31, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Tags:
  1. TxJack

    TxJack Rookie

    Joined:
    Apr 23, 2021
    Messages:
    1
    Location:
    Dallas
    Full Name:
    Jack Oppel
    I am having new leather straps made for holding the tool kit and manuals case. The upper strap connection to the car is held in place by two hex head fasteners. It certainly appears to me that the lower strap is held in place by to small rivets.
    Can anyone confirm? None of my bits fit and my old eyes , even with my readers, can not see the detail.

    Image Unavailable, Please Login
     
    TxJack, May 31, 2021
    #1
  2. Extreme1

    Extreme1 Formula 3

    Joined:
    Jun 27, 2017
    Messages:
    1,461
    Location:
    Santa Clarita, CA
    Yes those are pop rivets. The left one has the center shank still in it, the right one doesn’t.

    Those can both be drilled out, or the head cut off and punched out.

    You’ll need to remove the frunk panels from the car because if it’s like the 430, there are metal backing plates on the backside of the frunk panels.


    Sent from my iPhone using FerrariChat.com mobile app
     
    Extreme1, May 31, 2021
    #2
  3. clean512

    clean512 Formula 3

    Joined:
    Feb 4, 2010
    Messages:
    2,147
    Full Name:
    Josh @jtcarprojects
    Mcmaster carr will have new ones. And it's not a sin to buy new hardware not from Ferrari
     
    clean512, Jun 1, 2021
    #3
  4. timwu12

    timwu12 Formula Junior

    Joined:
    Oct 31, 2014
    Messages:
    919
    Location:
    TX
    you should consider chicago screws when you go to reinstall. Easier to remove again in the future than riveting
     
    timwu12, Jun 1, 2021
    #4

Share This Page