Type of fastener 360 | FerrariChat

Type of fastener 360

Discussion in '360/430' started by TxJack, May 31, 2021.

Tags:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. TxJack

    TxJack Rookie

    Apr 23, 2021
    1
    Dallas
    Full Name:
    Jack Oppel
    #1 TxJack, May 31, 2021
    I am having new leather straps made for holding the tool kit and manuals case. The upper strap connection to the car is held in place by two hex head fasteners. It certainly appears to me that the lower strap is held in place by to small rivets.
    Can anyone confirm? None of my bits fit and my old eyes , even with my readers, can not see the detail.

    Image Unavailable, Please Login
     
  2. Extreme1

    Extreme1 Formula 3

    Jun 27, 2017
    1,231
    Santa Clarita, CA
    #2 Extreme1, May 31, 2021
    Yes those are pop rivets. The left one has the center shank still in it, the right one doesn’t.

    Those can both be drilled out, or the head cut off and punched out.

    You’ll need to remove the frunk panels from the car because if it’s like the 430, there are metal backing plates on the backside of the frunk panels.


    Sent from my iPhone using FerrariChat.com mobile app
     
  3. clean512

    clean512 Formula 3
    Silver Subscribed

    Feb 4, 2010
    2,029
    Full Name:
    Josh @jtcarprojects
    #3 clean512, Jun 1, 2021
    Mcmaster carr will have new ones. And it's not a sin to buy new hardware not from Ferrari
     
  4. timwu12

    timwu12 Formula Junior
    Silver Subscribed

    Oct 31, 2014
    919
    TX
    #4 timwu12, Jun 1, 2021
    you should consider chicago screws when you go to reinstall. Easier to remove again in the future than riveting
     

Share This Page