95 F355 Valve Guides.....Fact vs. Fiction !!! | Page 6 | FerrariChat

95 F355 Valve Guides.....Fact vs. Fiction !!!

Discussion in '348/355' started by FLATOUTRACING, Jan 12, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Dave rocks

    Dave rocks F1 World Champ BANNED

    Joined:
    Nov 23, 2012
    Messages:
    16,047
    Location:
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    IIRC, valves are induction (case) hardened to 65 RC and guides are similar (when steel). So bronze is gonna be a whole lot less. I don't know Ferrari spec but I'm speaking general terms from the days when I designed automated assembly equipment for GM and I've done both automated guide assembly, seat assembly and key up.
     
  2. lonestarrpm

    lonestarrpm Karting

    Joined:
    Aug 26, 2013
    Messages:
    57
    Location:
    Austin, Texas
    Full Name:
    Lone Star RPM. LLC
    Assuming you have the engine out for a 30K service
    what is the additional cost to do the valve guides?

    How much of that is parts?
    Machine Shop work?
    Labor?

    Just trying to budget if I were to get a 355 and planned to do the work myself
    vs paying extra for one that already had it done.

    thanks,

    m
     
  3. Freddan

    Freddan Formula 3 Rossa Subscribed

    Joined:
    Sep 16, 2012
    Messages:
    2,448
    Location:
    Vansbro (Sweden)
    Full Name:
    Fredrik
    where can i find the service interwall for the F355?
     
  4. ASK328

    ASK328 Formula 3 Silver Subscribed

    Joined:
    Sep 23, 2005
    Messages:
    2,481
    Full Name:
    Andrew
    5k ish
     
  5. Smyrna355Spider

    Smyrna355Spider F1 Rookie Owner Silver Subscribed

    Joined:
    Feb 9, 2008
    Messages:
    3,763
    Location:
    In my Garage
    Full Name:
    Scott
    I wish I could have had them replaced for that amount.
     
  6. phrogs

    phrogs F1 Veteran Silver Subscribed

    Joined:
    Apr 13, 2004
    Messages:
    7,370
    Location:
    Kzoo Michigan
    So any recommendations on who I could send my years to if they ever need this done? I would pull the heads myself and send them out then reinstall myself. That gas to be less than 5k that is ridiculous.
     
  7. JDG16

    JDG16 Karting

    Joined:
    Jul 25, 2011
    Messages:
    200
    Location:
    Houston
    Full Name:
    Justin
    yeah, i agree. Its higher.

    The answer to the question is to buy one with the work done, by one of the few reputable experts on these cars. The process of engine out, major, guides, and "while your in there's" will cost the owner $20k-$30k in most situations. No way he gets that back in sale price.

    I'm looking at it from a reverse perspective and its kind of like modifications to the car. You get just a fraction of the investment back in resale.
     
  8. tazandjan

    tazandjan Three Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Jul 19, 2008
    Messages:
    39,364
    Location:
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    ShineKen likes this.
  9. m5guy

    m5guy Formula 3

    Joined:
    Aug 17, 2008
    Messages:
    1,627
    Location:
    Ventura, CA.
    Full Name:
    Greg
    Terry, FYI from what I've read, Gary Sharpe has refocused his business on other marques and the www.srexotics.com website is no longer active.
     
  10. yelcab

    yelcab F1 World Champ Consultant

    Joined:
    Nov 29, 2001
    Messages:
    13,692
    Location:
    San Carlos, CA
    Full Name:
    Mitchell Le
    Oh that is too bad. Gary is a real asset for the F355.
     
  11. ttforcefed

    ttforcefed F1 World Champ Rossa Subscribed

    Joined:
    Aug 22, 2002
    Messages:
    19,285
    this post shld be a sticky!
     
  12. The Outcast

    The Outcast Formula 3

    Joined:
    Apr 19, 2011
    Messages:
    1,562
    Location:
    Royal Oak Michigan
    Agreed! Mods....?
     
  13. kilof16

    kilof16 Rookie

    Joined:
    May 27, 2016
    Messages:
    13
    Does anyone know if there is a list/source to link up assembly numbers with VIN numbers?
     

Share This Page