Some TLC for my QV | Page 17 | FerrariChat

Some TLC for my QV

Discussion in 'Mondial' started by afterburner, Mar 25, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 17 of 33
  1. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    Defroster screws touch-up paint
    Image Unavailable, Please Login
    lateral outlets refitted
    Image Unavailable, Please Login
    Upper and lower half re-assembled:
    Image Unavailable, Please Login

    Image Unavailable, Please Login
    Internal assembly: Cabin air sensor/suction pump and outlet ducts
    Image Unavailable, Please Login

    Image Unavailable, Please Login

    Image Unavailable, Please Login
    Centre bracket refitted
    Image Unavailable, Please Login
    centre vent fitted
    Image Unavailable, Please Login
    glovebox
    Image Unavailable, Please Login
     
    afterburner, Jul 1, 2021
    #401
    Tsionic and moysiuan like this.
  2. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    Image Unavailable, Please Login

    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Cluster corner (those that were broken) reinforcements:
    Image Unavailable, Please Login Image Unavailable, Please Login
    Detail of glove box solenoid and map reading light/switch
    Image Unavailable, Please Login
    USB / 12V side
    Image Unavailable, Please Login
    NB: Cable passage in clock/odo/milage counter - avoids pinching them when the cluster is fitted correctly

    Image Unavailable, Please Login
    Fitting of the Power Steering speed sensor signal wiring (additional black loom)
    Image Unavailable, Please Login
     
    afterburner, Jul 1, 2021
    #402
  3. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    afterburner, Jul 1, 2021
    #403
    moysiuan and MvT like this.
  4. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    afterburner, Oct 13, 2021
    #404
  5. MvT

    MvT F1 Rookie

    Joined:
    May 25, 2013
    Messages:
    4,261
    Location:
    The Netherlands - NH
    Full Name:
    Tijn
    Really like the new of cockpit instead of the plastic box! Neat job :cool:

    What are these? new back plates?
     
    MvT, Oct 23, 2021
    #405
  6. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    Image Unavailable, Please Login I added the missing numbers on the auxiliary instruments and the green arc in which operation is normal, for both the metrical and imperial system - just in case anyone wondered what the other bars mean. Including orange arcs:
     
    Last edited: Oct 24, 2021
    afterburner, Oct 24, 2021
    #406
  7. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    afterburner, Oct 24, 2021
    #407
    theunissenguido and MvT like this.
  8. MvT

    MvT F1 Rookie

    Joined:
    May 25, 2013
    Messages:
    4,261
    Location:
    The Netherlands - NH
    Full Name:
    Tijn
    MvT, Nov 11, 2021
    #408
  9. MvT

    MvT F1 Rookie

    Joined:
    May 25, 2013
    Messages:
    4,261
    Location:
    The Netherlands - NH
    Full Name:
    Tijn
    I was curious, not sure I read over it, and I am almost sure you did this, but did you check the valve measurements, cam shafts outs etc?

    There seems to be a an oil lubrication in the head on the side of the rotors. The first lubrication from the rotor side is drilled in an angle instead of strait down. Did you do this mod as well?

    I just recently came to know this from a F friend who brought his F in for a full service at the F dealer. They corrected this mistake. All engine (heads) have this and was after a long time corrected in the 348.
     
    MvT, Nov 11, 2021
    #409
  10. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    No I haven't checked that - the heads were off 10 years ago and it ran fine since.
    I did drill the oil drain for the second gear hydraulic lock issue and that does solve the problem.
     
    afterburner, Nov 11, 2021
    #410
  11. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    No, I indicated the missing numbers and added the red zones (not good), green zones (good), amber zones (watch out) and in blue/green the lines for the oil pressure limits. Just for reference in case you were wondering what those lines mean on the instruments in relationship to the limits.
     
    afterburner, Nov 11, 2021
    #411
    ronfrohock likes this.
  12. jjmalez

    jjmalez F1 Veteran Silver Subscribed

    Joined:
    Apr 8, 2005
    Messages:
    6,844
    Location:
    Northern Illinois
    Full Name:
    Joseph
    Hello,

    I just came across this thread. So very nice.

    Love the Mondial Coupe.
     
    jjmalez, Nov 13, 2021
    #412
    afterburner likes this.
  13. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    Time for an update: The re-assembly continues with the tail and fog lamps:

    Image Unavailable, Please Login
    Fuel filler flap
    Image Unavailable, Please Login
    Filler recess drain:

    Image Unavailable, Please Login

    Sunroof and dome light wiring, both sides have a ground:
    Image Unavailable, Please Login
    Sunroof drains - forward starting points at the A-pillar top:
    Image Unavailable, Please Login Image Unavailable, Please Login
    Ends inside the cowl through a grommet:

    Image Unavailable, Please Login Image Unavailable, Please Login
    Lower exits
    Image Unavailable, Please Login
    bonnet gutter drains:


    Image Unavailable, Please Login
     
    afterburner, Nov 28, 2021
    #413
  14. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    Rear wiring loom installation - front door jamb to the last tail lamp and sideways to the centre console underneath the rear seat - tough job
    Image Unavailable, Please Login
    along the sill and up the rear fire wall
    Image Unavailable, Please Login
    engine bay connectors
    Image Unavailable, Please Login

    Image Unavailable, Please Login
    out the rear fire wall
    Image Unavailable, Please Login
    inside the trunk
    Image Unavailable, Please Login
    Image Unavailable, Please Login Image Unavailable, Please Login
    There are sheet metal clamps everywhere to hold them up. I used el. shrink tube to protect the loom:

    Image Unavailable, Please Login
    Some repairs needed here
    Image Unavailable, Please Login
     
    afterburner, Nov 28, 2021
    #414
  15. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    With the wiring installed and connected in the trunk the repaired trim can be refitted. First to go in is the vertical heat shield towards the firewall, screwed at the bottom and pop riveted along the top:
    Image Unavailable, Please Login
    and in; note the preserved factory tapes Image Unavailable, Please Login

    the double layer horizontal heat protection from the exhaust goes in next
    Image Unavailable, Please Login
    Note trunk lock emergency access trap:
    Image Unavailable, Please Login
    first layer in:
    Image Unavailable, Please Login
    FRP intermediate layer
    Image Unavailable, Please Login
    FRP trunk floor with additional heat insulation gets riveted in place
    Image Unavailable, Please Login Image Unavailable, Please Login
     
    afterburner, Nov 28, 2021
    #415
  16. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    Original licence plate screw inserts
    Image Unavailable, Please Login
    Horsey
    Image Unavailable, Please Login
    Nose badge
    Image Unavailable, Please Login
    trunk script, incl. runner washers to stop water ingress
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    licence plate lamps, all restored originals
    Image Unavailable, Please Login
    pininfarina badging
    Image Unavailable, Please Login Image Unavailable, Please Login
    restored sill protections

    Image Unavailable, Please Login Image Unavailable, Please Login
     
    afterburner, Nov 28, 2021
    #416
    Mike Morrissey likes this.
  17. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    New engine bonnet sound deadening/heat shielding added
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    cowl drain and heater hoses added
    Image Unavailable, Please Login
    rear wiring loom installed on center tunnel
    Image Unavailable, Please Login
    NOS door gasket arrived shrunk and delaminated... needs to be re-replaced - bad surprise:

    Image Unavailable, Please Login Image Unavailable, Please Login
    RH side fits perfectly
    Image Unavailable, Please Login
    Mondial script installed
    Image Unavailable, Please Login
    Plates and blinker repeaters
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
    afterburner, Nov 28, 2021
    #417
  18. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    engine bonnet gasket and edge seal
    Image Unavailable, Please Login

    trunk and engine bonnet locks installed
    Image Unavailable, Please Login Image Unavailable, Please Login
    all threads retapped - there are many!
    Image Unavailable, Please Login
    Good ground connections are crucial - battery cut-off and main ground
    Image Unavailable, Please Login
    wiper arm assembly installed
    Image Unavailable, Please Login
    AC dryer
    Image Unavailable, Please Login
    HVAC intake cover
    Image Unavailable, Please Login
    note ss screws with rubber washers
    Image Unavailable, Please Login
    filler neck gasket refitted
    Image Unavailable, Please Login
     
    afterburner, Nov 28, 2021
    #418
  19. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    tire pressure sticker applied
    Image Unavailable, Please Login
    heater valve in position
    Image Unavailable, Please Login
    hand brake switch installed
    Image Unavailable, Please Login
    trunk solenoid
    Image Unavailable, Please Login
    engine bonnet solenoid
    Image Unavailable, Please Login
    warning light connection for engine bonnet
    Image Unavailable, Please Login
    mileage counter
    Image Unavailable, Please Login
    washer hoses put in
    Image Unavailable, Please Login
    front bonnet pull cables and lock installed
    Image Unavailable, Please Login Image Unavailable, Please Login
     
    afterburner, Nov 28, 2021
    #419
  20. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    afterburner, Nov 28, 2021
    #420
  21. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    door lock pin and finishers with new gaskets installed
    Image Unavailable, Please Login Image Unavailable, Please Login
    door open floor illumination courtesy lights installed
    Image Unavailable, Please Login Image Unavailable, Please Login
    secondary lower door seals refitted
    Image Unavailable, Please Login Image Unavailable, Please Login
    window regulators positioned
    Image Unavailable, Please Login Image Unavailable, Please Login
    exterior door handles fitted
    Image Unavailable, Please Login Image Unavailable, Please Login
     
    afterburner, Nov 28, 2021
    #421
    moysiuan likes this.
  22. ronfrohock

    ronfrohock F1 Rookie Owner Rossa Subscribed

    Joined:
    Aug 16, 2004
    Messages:
    4,182
    Location:
    MA
    Full Name:
    Ron Frohock
    ronfrohock, Nov 28, 2021
    #422
  23. afterburner

    afterburner F1 Rookie Silver Subscribed

    Joined:
    Jun 20, 2008
    Messages:
    3,513
    Location:
    Switzerland
    Full Name:
    Urs STEMMLER
    afterburner, Nov 28, 2021
    #423
    Jeka, decampos and moysiuan like this.
  24. 2cam

    2cam Formula Junior

    Joined:
    Aug 28, 2014
    Messages:
    751
    Location:
    Austin, Texas
    Full Name:
    MikeS
    Absolutely incredible level of detail and amazing work! Thank you so much for documenting everything. It really is beneficial to see how the cars are put together.

    2cam
     
    2cam, Nov 28, 2021
    #424
    afterburner and moysiuan like this.
  25. stekkefun4

    stekkefun4 Formula 3 BANNED

    Joined:
    Nov 22, 2006
    Messages:
    2,232
    Location:
    Belgium - Europe
    Must be the newest Mondial in the world :)
    Absolutely epic restoration , you really must be crazy about this car (like the rest of us of course :) ). And as a daily driver, it is worth the work!

    BTW: your car is miss August in our calendar :)
     
    stekkefun4, Nov 29, 2021
    #425
Page 17 of 33

Share This Page