Wanted Ferrari 360 Steering Wheel and Airbag

If you have a little more budget and are willing to be a bit more patient, I would highly recommend trying to search for a 360 CS steering wheel. I originally purchased a 360 steering wheel, then found the 360 CS wheel. IMO, I think it looks a ton better. I've attached photos of both. Good luck!

Image Unavailable, Please Login Image Unavailable, Please Login

 

New steering wheel is $2,573
Air bag I have in stock is $1,300

 

I don't have a stock steering wheel, but I have this one if you are interested?

Image Unavailable, Please Login Image Unavailable, Please Login

 

Is the airbag new?

 

Phone Ferrparts. They sell them often

 

Take the custom one if the price is right and get the airbag separately. They are all the same. My 575M has a 360 airbag (same as 575M) and 575M wheels also fit 360s with a little work on the horn wiring. This one from MAcarbon.



Image Unavailable, Please Login Image Unavailable, Please Login

 

How much are you selling this for? Please PM

 

Hi Lyle I have a F355 and already have the F360 wheel but need the air bag. I would like to buys yours so I can install it!
Much appreciated
Roy Torrence

 

My apologies Gated! I’m new here and still figuring this all out. Didn’t mean to step on your thread! I’ll sort out how to start a thread!

 

There are several 360 steering wheels for sale in Europe on eBay Germany, including I believe a not-black CS wheel.
No airbags though.

 

Not easy to find, i found my ones last week!

Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Well this person is selling the cover+wheel, but not the airbag module it self.

https://www.ebay.com/itm/115163587887

 

I have been watching your posts for some time as I too was in the same predicament, only converting to the 360 wheel and airbag for a 550.
I scoured the earth on every media and recycler for more than two years to no avail.
Eurospares had a new old stock wheel in black with blue stitching for $1,150 and has some air bags but they absolutely will not ship them.
Even though my O.E. wheel is Blu Scuro, I reserved myself to black which I would have been absolutely fine with.
At some point I realized I was gonna have to assemble the package separately.
I looked at airbags from the various recyclers that looked like they either had someone’s forehead imprint in them or had taken a hit with a couple front teeth.
Then there were others that were poorly re-dyed and even one that was rebuilt, but the tabs were still broken, so what good was it?Found a perfect airbag on Red Bay in Belgium but I missed it by 1 day!
Then I found an absolutely perfect wheel and airbag cover on EBay in the UK. Had red stitching but I figured I could always have it redone at a later date if I really wanted it changed that bad. Ultimately, I was the only bidder and paid, delivered to my doorstep, $825.00.
Much to my amazement, what I thought was a black wheel and airbag was actually Blu Scuro after all, so you can imagine how thrilled I was with that.
So then I had to embark upon finding a bypass resistor. Tested my current airbag to determine the correct Ohms and purchased this 2.2 Ohm item on EBay in the U.K. It is also fused which is cool. It’s the most professionally done version I’ve seen and as you can see, the installation is clean. I did electrical tape it after I put the quick tie on.
Anyways, I figure until I find that Holy Grail of a perfect airbag in my color, I’m flying with this.
I wish you all the luck in the world. I too had a 355 (Blu Swaters over Tan) and I would have loved to have made the conversion you are endeavoring to do. Great look!
I’ll be watching your posts in anticipation of seeing some photos when it all comes to fruition for you!
Kent


Image Unavailable, Please Login Image Unavailable, Please Login