How to remove Door Panels and Tweeter Housings? | FerrariChat

How to remove Door Panels and Tweeter Housings?

Discussion in '348/355' started by Eric C, Feb 13, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Eric C

    Eric C F1 Veteran
    Rossa Subscribed

    Mar 20, 2009
    9,100
    St. Louis, MO
    Full Name:
    Eric
    #1 Eric C, Feb 13, 2015
    Rest assured, I searched but nothing jumped out.

    Can someone give me a short and simple run down of how to remove the Door Panels and Tweeter housings in a F355?

    I'm installing a new component set and installing new acoustical carpet on the door panels.

    Much appreciated!
    Eric
     
  2. NSXn355

    NSXn355 Rookie

    May 3, 2014
    48
    Northern NY
    Full Name:
    Bill
    #2 NSXn355, Feb 13, 2015
  3. gobble

    gobble Formula 3
    Owner Regional Sponsor

    Jan 29, 2010
    1,647
    Milwaukee, WI
    Full Name:
    Ferrarifobs.com
    #3 gobble, Feb 13, 2015
    The tweeters are exposed when you remove the dash vents. I found a set of plastic interior removal tools really helps with those.
     
  4. Eric C

    Eric C F1 Veteran
    Rossa Subscribed

    Mar 20, 2009
    9,100
    St. Louis, MO
    Full Name:
    Eric
    #4 Eric C, Feb 13, 2015
    Thanka ya'll! Dave Rocks sent me to directions, but this is great too!
     
  5. judd10

    judd10 Formula Junior
    Silver Subscribed

    Dec 30, 2006
    457
    Seattle, WA
    #5 judd10, Dec 3, 2022
  6. m.stojanovic

    m.stojanovic F1 Rookie
    Silver Subscribed

    Dec 22, 2011
    2,760
    Malaysia - KL
    Full Name:
    Miroljub Stojanovic
    #6 m.stojanovic, Dec 3, 2022
    The best way is to turn it clockwise (as you look at it).
     
  7. judd10

    judd10 Formula Junior
    Silver Subscribed

    Dec 30, 2006
    457
    Seattle, WA
    #7 judd10, Dec 4, 2022
    I tried but didn’t seem to turn and I didn’t want to force/break anything. So just twist hard? Is it doable by hand or do you need to get some kind of wrench in there or take the mount out?
     
  8. m.stojanovic

    m.stojanovic F1 Rookie
    Silver Subscribed

    Dec 22, 2011
    2,760
    Malaysia - KL
    Full Name:
    Miroljub Stojanovic
    #8 m.stojanovic, Dec 4, 2022
    Probably somewhat stuck to the paint. I would try to push/knock a bit on every of the 4 plastic tabs, vey carefully not to damage them, which may break the bond.
     
    judd10 likes this.

Share This Page