Clean512 ..360 coupe project | Page 33 | FerrariChat

Clean512 ..360 coupe project

Discussion in '360/430' started by clean512, Jun 3, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. clean512

    clean512 Formula 3

    Joined:
    Feb 4, 2010
    Messages:
    2,129
    Full Name:
    Josh @jtcarprojects
    Welcome to custom stuff.
     
  2. duck.co.za

    duck.co.za Formula 3

    Joined:
    Jan 9, 2007
    Messages:
    1,007
    Location:
    Cape Town South Afri
    Full Name:
    Dave
    At least on the 360 door some of the existing mountings can be used only a few need to be changed/lengthened . Where the 430 door is quite different inside with that stiffener . Image Unavailable, Please Login
     
    veilstylez and clean512 like this.
  3. clean512

    clean512 Formula 3

    Joined:
    Feb 4, 2010
    Messages:
    2,129
    Full Name:
    Josh @jtcarprojects
    I had to make two longer. But everything else worked
     
    duck.co.za likes this.
  4. Flea7

    Flea7 Formula 3 Owner Rossa Subscribed

    Joined:
    Feb 25, 2010
    Messages:
    1,970
    Location:
    PNW
    Full Name:
    SKIM
    Mark has a good write-up on converting his door panel. those brackets doesn't look too hard to make. look it up on his thread. Glad you found a set of scud panels!
     
    duck.co.za and veilstylez like this.
  5. veilstylez

    veilstylez Formula 3 Rossa Subscribed

    Joined:
    Jun 12, 2005
    Messages:
    1,036
    Location:
    SoCal
    @duck.co.za niiiice thanks for the picture
    @clean512 wow only 2! dang Ill take existing brackets all day than none.
    @Flea7 thanks! Im actually still missing the LH side panel =)
     
    duck.co.za and clean512 like this.
  6. Flea7

    Flea7 Formula 3 Owner Rossa Subscribed

    Joined:
    Feb 25, 2010
    Messages:
    1,970
    Location:
    PNW
    Full Name:
    SKIM
    duck.co.za, veilstylez and mwstewart like this.
  7. mwstewart

    mwstewart F1 Rookie

    Joined:
    Feb 5, 2014
    Messages:
    2,784
  8. Flea7

    Flea7 Formula 3 Owner Rossa Subscribed

    Joined:
    Feb 25, 2010
    Messages:
    1,970
    Location:
    PNW
    Full Name:
    SKIM
    PM sent Mark.
     
    mwstewart likes this.
  9. veilstylez

    veilstylez Formula 3 Rossa Subscribed

    Joined:
    Jun 12, 2005
    Messages:
    1,036
    Location:
    SoCal
    clean512 likes this.
  10. clean512

    clean512 Formula 3

    Joined:
    Feb 4, 2010
    Messages:
    2,129
    Full Name:
    Josh @jtcarprojects
  11. armedferret

    armedferret Formula 3

    Joined:
    Mar 24, 2018
    Messages:
    1,344
    Location:
    Maryland
    Full Name:
    Mark
    #mirrorselfie ;)
     
    Sj_engr and clean512 like this.
  12. Flea7

    Flea7 Formula 3 Owner Rossa Subscribed

    Joined:
    Feb 25, 2010
    Messages:
    1,970
    Location:
    PNW
    Full Name:
    SKIM
  13. clean512

    clean512 Formula 3

    Joined:
    Feb 4, 2010
    Messages:
    2,129
    Full Name:
    Josh @jtcarprojects
    I'll look into that. Thanks buddy
     
  14. Flea7

    Flea7 Formula 3 Owner Rossa Subscribed

    Joined:
    Feb 25, 2010
    Messages:
    1,970
    Location:
    PNW
    Full Name:
    SKIM
    Let me know if you can find the scud part.
     
  15. clean512

    clean512 Formula 3

    Joined:
    Feb 4, 2010
    Messages:
    2,129
    Full Name:
    Josh @jtcarprojects
    EhellGuapo, Flea7, Mr. Uy and 6 others like this.
  16. GogglesPisano

    GogglesPisano F1 Rookie Silver Subscribed

    Joined:
    Sep 13, 2022
    Messages:
    3,314
    Location:
    East Bay, California
    Full Name:
    Joe
    Nice! Are you going to have the seal or anything rebuilt first or are they good to go?
     
  17. clean512

    clean512 Formula 3

    Joined:
    Feb 4, 2010
    Messages:
    2,129
    Full Name:
    Josh @jtcarprojects
    It was from a low millage scud. ..illl look them over but there 9 years newer then my 99 stuff. And way better
     
    GogglesPisano and armedferret like this.
  18. clean512

    clean512 Formula 3

    Joined:
    Feb 4, 2010
    Messages:
    2,129
    Full Name:
    Josh @jtcarprojects
    It was from a low millage scud. ..illl look them over but there 9 years newer then my 99 stuff. And way better
     
    one4torque likes this.
  19. Malakas

    Malakas Karting

    Joined:
    Mar 30, 2014
    Messages:
    52
    Are the compatible with the 360s electronically controlled damper system? Plug and play?
     
    clean512 likes this.
  20. clean512

    clean512 Formula 3

    Joined:
    Feb 4, 2010
    Messages:
    2,129
    Full Name:
    Josh @jtcarprojects
    I talked to trev and most likely they will be fine.. but when there is a will there is away to figure it out
     
    duck.co.za likes this.
  21. RANDY6005

    RANDY6005 Formula 3 Silver Subscribed

    Joined:
    Jan 9, 2017
    Messages:
    2,271
    Location:
    Jacksonville
    Full Name:
    RANDY
    Suspension ECUs are not the same 360 & CS 430 I bought the CS ECU maybe the 430scud same as CS ?
     
    clean512 likes this.
  22. TheRyanH

    TheRyanH Karting Rossa Subscribed

    Joined:
    Apr 19, 2021
    Messages:
    85
    Location:
    Los Angeles
    Full Name:
    Ryan H.
    This thread is going to cost me a lot of money
     
    clean512 likes this.
  23. clean512

    clean512 Formula 3

    Joined:
    Feb 4, 2010
    Messages:
    2,129
    Full Name:
    Josh @jtcarprojects
    Glad to help
     
    armedferret likes this.
  24. Abowabah

    Abowabah Rookie BANNED

    Joined:
    Mar 14, 2025
    Messages:
    31
    Location:
    Jacksonville, Florida
    Full Name:
    Karl
    Yes!!! I Love my CS Muff
     
  25. clean512

    clean512 Formula 3

    Joined:
    Feb 4, 2010
    Messages:
    2,129
    Full Name:
    Josh @jtcarprojects
    Ok
     

Share This Page