my 360 Modena Twin Turbo | FerrariChat

my 360 Modena Twin Turbo

Discussion in '360/430' started by Hubert888, May 19, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 1 of 4
  1. Hubert888

    Hubert888 F1 Veteran BANNED

    Joined:
    May 14, 2003
    Messages:
    5,441
    Location:
    Manhattan & LA
    Full Name:
    Hubert
    my 360 Modena Twin Turbo setup was done by Classic Coach Ferrari in Elizabeth, NJ (www.ccferrari.com)

    Result:
    Max HP: 512 to wheels
    Torque: 348 ft/lb to wheels
    (car running 5 lbs of boost)


    Before Dyno Engine Mods:
    1) Tubi exhaust
    2) Capristo Silenced Pipes
    3) Challenge Air Intake RAM
    4) K&N Sport Filters
    5) Imola Racing Carbon Airbox Covers

    After dyno run conditions:
    1) custom 360 twin turbo setup by Classic Coach Ferrari
    2) weather was ~ 13 degrees hotter than the before dyno temperature
    3) humidity was ~ 30% more humid than before dyno humidity
    4) car was running 93 octane (compared to 91 octane for before dyno)
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    Hubert888, May 19, 2006
    #1
  2. PAP 348

    PAP 348 Ten Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Dec 10, 2005
    Messages:
    100,220
    Location:
    Mount Isa, Australia
    Full Name:
    Pap
    Aye-karumba!!!!!!!!! 512HP at the wheels! Somebodys gunna have alot of fun!! :D Awesome! They did a great job with your car,it looks magnificent. 512RWHP on a internally stock engine?? :)
     
    PAP 348, May 19, 2006
    #2
  3. Lovinthe360

    Lovinthe360 Rookie

    Joined:
    May 14, 2005
    Messages:
    20
    Location:
    NorCal
    Full Name:
    John
    Do you have any video of this bad boy on the street? That is one bad ass race horse!
     
    Lovinthe360, May 19, 2006
    #3
  4. LMPDesigner

    LMPDesigner F1 Rookie

    Joined:
    Nov 5, 2003
    Messages:
    3,208
    Location:
    Atlanta Georgia
    I just have to know--What did the twin turbo set up cost you in the end. It looks like a really well put together package. Very professional.
     
    LMPDesigner, May 19, 2006
    #4
  5. PAP 348

    PAP 348 Ten Time F1 World Champ Lifetime Rossa Owner

    Joined:
    Dec 10, 2005
    Messages:
    100,220
    Location:
    Mount Isa, Australia
    Full Name:
    Pap

    If he does decide to tell you...........make sure you are sitting down for it :D
     
    PAP 348, May 19, 2006
    #5
  6. yano

    yano Rookie

    Joined:
    Aug 15, 2004
    Messages:
    12
    I saw a SC kit for the 360 that was around $54k, I would think that a TT kit would cost a bit more. I am guessing around $60-75k.

    Why only run 5psi? Is that all the stock motor can handle?

    On my Z06 TT, at 13psi I put 730RWHP on 91octane.

    I bet that car is fun to drive.

    Enjoy
     
    yano, May 19, 2006
    #6
  7. scott.waldon

    scott.waldon Formula Junior

    Joined:
    Jan 26, 2006
    Messages:
    316
    Location:
    Sydney, Australia
    Full Name:
    Scott
    Thats Carzy!, Looks very professional!!, a rekon you will be able to have some fun :)
     
    scott.waldon, May 20, 2006
    #7
  8. GCalo

    GCalo F1 Veteran

    Joined:
    Sep 15, 2004
    Messages:
    7,645
    Location:
    Northern California
    Full Name:
    Greg Calo
    Are those intake covers different?

    If you had put BMC air filters in that animal before you would have gotten even better performance!
     
    GCalo, May 20, 2006
    #8
  9. derek a

    derek a Formula Junior

    Joined:
    Sep 17, 2004
    Messages:
    590
    Location:
    CA OR
    Full Name:
    Derek
    Looks awesome. I love those cf valve covers. Are you running any cats or mufflers?
     
    derek a, May 20, 2006
    #9
  10. RossoCorsaItaly

    RossoCorsaItaly F1 Rookie Rossa Subscribed

    Joined:
    Jun 9, 2004
    Messages:
    4,684
    Location:
    LA & OKC
    Full Name:
    Kevin
    It was probably less than that. The SC kit is also a namebrand kit from Germany, typically aftermarket components designed and made in the U.S. are cheaper than German ones.

    On a side note Hubert, amazing dyno results. Thanks for sharing them with us.
     
    RossoCorsaItaly, May 20, 2006
    #10
  11. ferraripete

    ferraripete F1 World Champ

    Joined:
    Nov 5, 2003
    Messages:
    11,560
    Location:
    san diego/charlotte
    that is a actually a 360 that i would like to own! very, very nice hubert.

    speak to the sound if you don't mind. i bet it sounnds like an f-14 on the boost!!
     
    ferraripete, May 20, 2006
    #11
  12. Racerboy

    Racerboy Formula Junior Silver Subscribed

    Joined:
    Feb 3, 2004
    Messages:
    468
    Location:
    Bay Area
    Is that 512 HP TO the wheels or AT the wheels? There is a big difference
     
    Racerboy, May 20, 2006
    #12
  13. RossoCorsaItaly

    RossoCorsaItaly F1 Rookie Rossa Subscribed

    Joined:
    Jun 9, 2004
    Messages:
    4,684
    Location:
    LA & OKC
    Full Name:
    Kevin
    Probably AT the wheels.
     
    RossoCorsaItaly, May 20, 2006
    #13
  14. charliebronson

    charliebronson Formula 3

    Joined:
    Dec 5, 2004
    Messages:
    1,244
    Full Name:
    Charliebronson
    =)))))))))))))))))))
    -Peter
     
    charliebronson, May 20, 2006
    #14
  15. Neak

    Neak Karting

    Joined:
    Jul 31, 2005
    Messages:
    125
    Location:
    Netherlands
    Full Name:
    Niek
    Awesome!
     
    Neak, May 20, 2006
    #15
  16. DrivnXcitment

    DrivnXcitment Karting

    Joined:
    Apr 29, 2006
    Messages:
    220
    Location:
    St. Augustine, FL
    Full Name:
    Bryan
    That is INCREDIBLE!! I would love to hear a sound clip of that beast. Do you have any traction issues with that much power?
     
    DrivnXcitment, May 20, 2006
    #16
  17. Fengtau

    Fengtau Formula Junior

    Joined:
    Dec 25, 2004
    Messages:
    358
    Location:
    Malaysia
    Wow!great job.How much you spend for this project?
    You changed to low compression piston?
     
    Fengtau, May 20, 2006
    #17
  18. derek a

    derek a Formula Junior

    Joined:
    Sep 17, 2004
    Messages:
    590
    Location:
    CA OR
    Full Name:
    Derek
    That's interesting that on the dyno graph the horizontal is in mph and not rpm. Is there a advantage in doing this?
     
    derek a, May 21, 2006
    #18
  19. Hubert888

    Hubert888 F1 Veteran BANNED

    Joined:
    May 14, 2003
    Messages:
    5,441
    Location:
    Manhattan & LA
    Full Name:
    Hubert
    no videos of 'this bad boy' yet.
     
    Hubert888, May 21, 2006
    #19
  20. Hubert888

    Hubert888 F1 Veteran BANNED

    Joined:
    May 14, 2003
    Messages:
    5,441
    Location:
    Manhattan & LA
    Full Name:
    Hubert
    Yes, the red kevlar/carbon engine cover is one of a kind.
     
    Hubert888, May 21, 2006
    #20
  21. Hubert888

    Hubert888 F1 Veteran BANNED

    Joined:
    May 14, 2003
    Messages:
    5,441
    Location:
    Manhattan & LA
    Full Name:
    Hubert
    high flow 200 cel cats
     
    Hubert888, May 21, 2006
    #21
  22. Hubert888

    Hubert888 F1 Veteran BANNED

    Joined:
    May 14, 2003
    Messages:
    5,441
    Location:
    Manhattan & LA
    Full Name:
    Hubert
    i apologize. its 512HP at the wheels
     
    Hubert888, May 21, 2006
    #22
  23. acmw

    acmw Formula Junior

    Joined:
    Apr 28, 2006
    Messages:
    575
    Location:
    Nj
    Full Name:
    Alex
    Can u give me a ballpark price? i wanna tt my 360 modena and i live about 10 miles away from classic coach
     
    acmw, May 21, 2006
    #23
  24. ExtinctM3

    ExtinctM3 Rookie

    Joined:
    Jan 6, 2006
    Messages:
    6
    Think about getting some real fuel in there. Like c16. I hear the turbo'd engines love that stuff.
     
    ExtinctM3, May 21, 2006
    #24
  25. Willis360

    Willis360 F1 Rookie

    Joined:
    Aug 4, 2001
    Messages:
    3,928
    Location:
    Redmond, WA
    Full Name:
    Willis H
    Very nice. The numbers on the pre-turbo dyno looks pretty good. Was the car completely stock?
     
    Willis360, May 21, 2006
    #25
Page 1 of 4

Share This Page