1/2 power | FerrariChat

1/2 power

Discussion in '612/599' started by F612, Aug 6, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. F612

    F612 Formula Junior

    Feb 5, 2018
    603
    Leeds,AL
    Full Name:
    David D. Hood
    On 2 occasions, after a cold start my 612 OTO was way down on power but ran smoothly.
    A restart fixed the issue. I'm guessing only one bank was running.
    Any explanation?
     
  2. TheCook

    TheCook Formula Junior

    Oct 16, 2015
    304
    Buckinghamshire
    Full Name:
    Ian
    I’ve had that once. I put it down to not waiting for the Check OK dash message before firing up.


    Sent from my iPhone using Tapatalk
     
  3. F612

    F612 Formula Junior

    Feb 5, 2018
    603
    Leeds,AL
    Full Name:
    David D. Hood
    I'll bet you are right. In both cases I was in a hurry to get going.
    Patience is a virtue!!

    Thank you...

    Any other thoughts?
     
  4. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    38,087
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    Have the injectors cleaned and resealed with Viton o-rings. You could have leaking/dripping injectors. Three of mine were dripping (7.1.1 575M).
     
  5. Nospinzone

    Nospinzone F1 Veteran

    Jul 1, 2013
    7,380
    Weston, MA
    Full Name:
    Paul
    ^
    That's it (unless it happens repeatedly).
     
  6. Kevin Borley

    Kevin Borley Rookie

    Oct 19, 2017
    24
    Full Name:
    Kevin Borley
    Hi

    Does anyone know how to remove the LED window and/or dismantle the steering wheel on a 599. The first LED is not working so want to explore options as to how to fix it without replacing the entire steering wheel. I know it is only cosmetic but these sort of thing annoy me.
     
  7. Kevin Borley

    Kevin Borley Rookie

    Oct 19, 2017
    24
    Full Name:
    Kevin Borley
    Apologoes ignore my previous post I will start a separate thread with an appropriate title
     

Share This Page