Our car went into the shop for an annual service and for TPMS sensor replacement. Now our radio looks like the photo. Is there some sort of reset code? I've never seen this before. Picture attached. Any help is appreciated. Image Unavailable, Please Login
The power must have been disconnected from car ..probably for maintenance It is looking for security code you hopefully have with your manuals etc .. it is on a red card the size of a credit card Sent from my moto x4 using Tapatalk
Hopefully you have the code card with the rest of the car docs. That makes it very easy as described above. Just enter the number. If you don’t have the code, Lil Daz on the 360/430 forum will get it for you for free. Search for the Becker radio code thread and he responds very quickly. You will need the serial number of the radio. I believe there are you tube videos on how to remove the radio so you can read the s/n. You need two removal keys that might be with the car docs to remove the radio otherwise borrow them from a fellow Ferrari owner or get them on eBay. The location of the slots to insert the removal keys vary by 360 or 430. Sent from my iPad using Tapatalk Pro
Reread the title. You have a Becker cascade 6112. The right side slot is visible in the lower right corner. Slide the Ferrari logo to the right and the volume control panel pops off. The left side slot is under this panel. And there are many videos showing how to insert the keys for radio removal. One last thought. In my 08 430, all the codes including the radio code were written in the owners manual by the dealer. Sent from my iPad using Tapatalk Pro
One hint. The Ferrari logo was really sticky on my 430. It took a lot of force to get it to slide to the right.
Thank you Thank you very much all of you for your response. I was able to find our Becker code in with our manuals and reset the radio without pulling it out. I appreciate all of the responses.
