News

2010 Ferrari California window/top switch replacement

Discussion in 'California/Portofino/Roma' started by Steve1979, Mar 27, 2020.

  1. Steve1979

    Steve1979 Rookie

    Feb 12, 2020
    21
    Austin
    Full Name:
    Steve Bowling
    I replaced the window switch on my 2010 Ferrari California today. The part number is Ferrari 82661100 and described as COMPL. RHT AND POWER WINDOW CONTROL

    This was quick and easy:

    1. In the center console you’ll see four hex head bolts. Two toward the rear and two in the front in holes by the cup holder.

    2. After taking the four bolts out the center console interior slides out.

    3. You’ll see two hex bolts below where the center console was. Remove them.

    4. Disconnect the three cables (two were under the console insert and one is the cigarette lighter that you’ll see when you lift up on the bar). Note: The clips slide off (and back on when reassembling) the plastic tab that holds them in place.

    5. Pull out the bar.

    6. Take out the four hex bolts holding the top and bottom together.

    7. Unscrew the 5 Phillips screws holding the switch on.

    8. Insert the new switch and reverse the process to put back together.

    I’ll attach a picture. Hope this helps. The dealer quoted 1.5 hours. I finished in 25 minutes.
     
  2. Steve1979

    Steve1979 Rookie

    Feb 12, 2020
    21
    Austin
    Full Name:
    Steve Bowling

Share This Page