308 GTSi

Discussion in 'Technical Q&A' started by Cooly0, Mar 8, 2004.

  1. Cooly0

    Cooly0 Karting

    Nov 2, 2003
    Full Name:
    I am just curious Where abouts do I adjust the advance on my 308 GTSi.
  2. To remove this ad click here.

  3. mk e

    mk e F1 World Champ

    Oct 31, 2003
    The twilight zone
    Full Name:
    The Butcher
    You don't.

    The ignition is solid state. Each distributor has it's own drive box the reads a crank signal and vacuum, then sets the timing to the programmed value. So to crange it, you need to install a new ignition system that can be adjusted. Electromtive makes one that is a multi-coil waste spark system. Also a haltech EFI computer can read the OEM crank signal and fire either your stock distributors or multiple coils the same as electromotive, but requires you to buy the coils and module separately. Another option is to install a mechanical distributor, but personally I perfer the electronic options

Share This Page