328 Engine Grill Attachment Rivets | FerrariChat

328 Engine Grill Attachment Rivets

Discussion in '308/328' started by 1963SWC, Mar 12, 2025 at 8:40 PM.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 1963SWC

    1963SWC Rookie

    Jan 23, 2025
    1
    Full Name:
    Lyle Mirsky
    Has anyone ever removed the grill above the engine compartment and re-installed? The rivets that attach the grill to the deck lid are between the louvers and appear to require a very very small rivet gun. I want to re-paint the louvers and need to remove them to do this correctly but looking to see if anyone know what gun the factory might have used to set these rivets with so little room for the head on the gun. A normal size rivet gun head will not fit between the louvers.
     
  2. flyngti

    flyngti Formula 3

    Jul 16, 2009
    1,230
    Snohomish, WA
    Full Name:
    Eric L
    I got the thinnest rivet gun I could find and even had to take a grinder to it make it thin enough to fit. I don't remember the brand but it was just a cheapo one at the hardware store
     
  3. Paul Kane

    Paul Kane Karting

    May 27, 2020
    235
    Rickmansworth UK
    Full Name:
    Paul Kane
    Ratarossa on YouTube had this problem too with his 512BBI, episode on this was approx 2/3 months ago.
     
  4. Anton Schicho

    Anton Schicho Rookie

    Mar 2, 2020
    2
    Full Name:
    Anton Schicho
    Hi,
    did it several times wach out for SEARS RIVETER ( Ebay 385288778960). Ca. 25 US.
     

Share This Page