348 clutch not hold pressure when engaged . | FerrariChat

348 clutch not hold pressure when engaged .

Discussion in '348/355' started by Sib0099, Mar 12, 2025 at 9:13 PM.

Tags:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Sib0099

    Sib0099 Rookie

    Oct 29, 2017
    22
    Kansas City
    Full Name:
    Sib Deliscious
    Recently the clutch on my 348ts has started to slowly engage while pushed in. Like if I’m at a stop light in gear with the clutch pushed in after a few seconds the clutch starts to engage while the pedal is still down. If I’m driving the pedal pressure feels regular and it shifts just fine. It’s when I’m sitting with the clutch in.
    No leaks in the rear of the car. However it seems to be pushing out fluid from the overflow tube on the reservoir . I’ve checked the master cylinder for leaks and the lines up front. No fluid anywhere. I’ve bled the clutch several times and no air in the lines. Any ideas?
    This is a newer clutch, and throw out bearing.
     
  2. fdekeu

    fdekeu Formula Junior
    Silver Subscribed

    Jun 19, 2008
    628
    Belzium
    Full Name:
    Frank
    There is an internal leak in the master
    Change the seals
     
    IvanRico likes this.

Share This Page