348 Glove box/Console door strut | FerrariChat

348 Glove box/Console door strut

Discussion in 'Technical Q&A' started by Ksullender, Feb 1, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Ksullender

    Ksullender Formula Junior

    Sep 3, 2003
    I am trying to locate the small struts located in the glove and console doors for a 348. If anyone has advice it would be greatly appreciated.
  2. ShanB

    ShanB Formula Junior

    Jul 9, 2003
    Full Name:
    They are all available OEM (same part but without the horsey) from Sachs North America. Go to: www.sachsna.com

    Get the part number off the online catalog and call them for the number of your local distributor. For what it's worth, I wouldn't bother replacing the small dashboard shocks as they don't hold the lid up anyway, but dampen it from slamming down. Just my opinion though.

    Good luck,
  3. 308GTS

    308GTS Formula 3

    Dec 27, 2001
    I agree. A new one won't even hold it up.
  4. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    From the Sachs catalog (page 12):

    SG437007 is used in the bonnet and engine lid
    SG437006 is used for the console
    SG437001 is used for the glove box

Share This Page