News

355 Clutch Ring Nut Socket Size?

Discussion in '348/355' started by redryder, Jun 28, 2008.

  1. redryder

    redryder Karting

    May 30, 2008
    100
    usa
    Full Name:
    george
    Could someone please tell me the correct size of the ring nut socket needed to remove the ring nut at the 355 clutch cover housing??

    TIA!!!!
     
  2. To remove this ad click here.

  3. PAP 348

    PAP 348 Moderator
    Moderator Owner

    Dec 10, 2005
    86,692
    Mount Isa, Australia
    Full Name:
    Pap
    #2 PAP 348, Jun 28, 2008
    Last edited by a moderator: Sep 7, 2017
  4. redryder

    redryder Karting

    May 30, 2008
    100
    usa
    Full Name:
    george
    Yes PAP.........I'm not sure if the 348 and 355 are the same size???.....but the car I'm working on is a 355.

    Thank You for posting a pic...
     
  5. redryder

    redryder Karting

    May 30, 2008
    100
    usa
    Full Name:
    george
    Size please....
     
  6. FandLcars

    FandLcars F1 Rookie

    Aug 6, 2006
    3,043
    Tempe, Az
    Full Name:
    Rick Schumm
    Check with Daniel at Ricambi America... www.ricambiamerica.com. They sell Hill Engineering ring nut tools, and he will know which one you need.
     
  7. To remove this ad click here.

  8. PAP 348

    PAP 348 Moderator
    Moderator Owner

    Dec 10, 2005
    86,692
    Mount Isa, Australia
    Full Name:
    Pap

    Heya mate. Forgot all about ya sorry. :):)

    I dont remember if they are the same size or not 348/355.

    I did make a tool for a friend a while ago. Same as this red one for my 348. He owns a 355 and by memory, the dimensions of the flywheel bolt he gave me, were identical to mine. So I made the tool the same for him. I dont know if he ever used it, so I cant tell you that it is 100% the same. :):)

    But Daniel at Ricambi does sell the right tool for the job. ;);)
     
  9. redryder

    redryder Karting

    May 30, 2008
    100
    usa
    Full Name:
    george
    Many thanks for all the help........looks like I'll be ordering one of these very shortly
     

Share This Page