News

355 power line feed to amps.

Discussion in '348/355' started by chaa, Feb 1, 2004.

  1. chaa

    chaa F1 Veteran

    Mar 21, 2003
    5,058
    Hey dudes before i start cutting with me hammer and chisil and stile saw, i want to run a positive line ither from the battery or the positive box to the right of the engine bay. What is the best route to feed the cable through to the driver compartment, from the battery or engine bay. I ask this before i drill a feeding hole through a bulkhead. Thanks.
     
  2. To remove this ad click here.

  3. zan

    zan Formula Junior

    Nov 15, 2002
    537
    Boston
    Full Name:
    Mark M
    Above and to the right of the passenger floor fuse box is where existing cables run through to the battery, plenty of room for another cable.
     
  4. chaa

    chaa F1 Veteran

    Mar 21, 2003
    5,058
    thanks zan.
     
  5. cwwhk

    cwwhk Formula 3

    Nov 13, 2003
    1,535
    Hong Kong, Tokyo
    Full Name:
    Wayne
    You will have much easier time accessing the the firewall grommet where the cables go through if you pulled off the rubber weather seal, unscrew and remove the steel trim plate around the vent fan, and lift up the panel that covers the top of the luggage compartment just in front of the windshield.

    I was able to get enough cables about 3/4" diameter in total through.
     

Share This Page