[ATTACH]
Torque ever nut and bolt and mark with TorqueSeal getting very close now . Refinish valve covers Replace timing belts pullies and tensioners with Hill Engineering upgrade Set ride height CS specs Replace front windshield and rear quarter glass with Plastics4Performance very high quality product.
F1 trans Ty hex heads and nuts 12mm 1.25 Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
No parts list I just pull and measure and order as I go, maybe some one has a TY kit for sale on ebay might be easer than what I have been doing. There is a hell of allot more than I ever expected ! Fasteners for a AC compressor and alternator are not standard lengths they will need to custom made.
Most of the time your saving 65 to 70 percent weight crazy ! Hoping all done 2500 2550 pounds or less
Start with replacing front and rear bumpers with Euro spec CS or Challenge ones, US bumpers twice the weight to meet US DOT standards. Replace your seats with carbon fiber race seats, replace lower front and rear control arms to 430 forged not standard 360 casted ones. Change standard Flamblocs or bushing to Challenge, shock springs to TY CS springs and replace all glass with Lexan glass from Plastic4Performance. This list could keep on going as you already know I am sure. There is 40 to 50 pounds of sound deadening has to be removed carpets and insulation.
Started engine for the first in over a year crank wright up !! Install new coil packs. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Randy do you have part # for the 430 lower arms. It allways seems when I search for them 360 arms just come up.
Part No: 200941 https://www.eurospares.co.uk/parts/ferrari/360-challenge-stradale/suspension-steering/front-suspension-wishbones-40587/200940
https://www.eurospares.co.uk/parts/ferrari/430-challenge-2006/suspension-steering/rear-suspension-wishbones-42706
Pulled off upper and lower control arms used stainless steel scrub pads to clean before treating it with Shark Hide Aluminum protectant. Shark Hide protectant has got to be hands down the best thing I have ever used !!!
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Helping a good friend with his suspension. 430 forged lower front control arm after cleaning with stainless steel scrub pads. He has a 360 gated shift replacing entire suspension to 430 forged control arms. Replacing standard flamblocks 430 Challenge flamblocks .
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login