456 undertray removal

Discussion in 'Technical Q&A' started by Davidindallas, Jul 25, 2010.

  1. Davidindallas

    Davidindallas Formula Junior

    Nov 5, 2003
    Trying to change my own oil for the first time. I know I need to drain from the block and the sump and to remove at least the rear undertray to access the block's drain plug. Does anyone know if I need to remove the forward undertray to access the sump and whether there are bolts other than the 4 center bolts that hold the rear undertray in place. I've removed them and can't seem to find the others (flashlight falling at that point and breaking didn't help. It looks like there may be two other bolts at the ends of the tray but they are connected to the anti sway bar. Thanks.
  2. To remove this ad click here.

  3. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    David- There are a bunch of people on the 456/550/575 forum who know all the answers to your questions. Ask this question there unless one of the moderators is in a good mood (I have personally seen this) and will move this thread to the most appropriate location.

    Terry Phillips

Share This Page