612 - How to remove the 1-din radio surround | FerrariChat

612 - How to remove the 1-din radio surround

Discussion in '612/599' started by jochem00, Oct 19, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. jochem00

    jochem00 Formula Junior

    Jun 19, 2014
    344
    Netherlands
    #1 jochem00, Oct 19, 2018
    What is the procedure to remove the 1-din Becker radio surround bezel from the 612?

    Is it just a matter of pulling out the HVAC control panel, remove the Becker and undo the screws?
     
  2. 360Marnix

    360Marnix Formula Junior

    Jan 4, 2017
    490
    Holland
    #2 360Marnix, Oct 19, 2018
    Hi Jochem, please PM me, maybe easier in dutch



    Verzonden vanaf mijn iPhone met Tapatalk
     
  3. brogenville

    brogenville Formula 3
    Rossa Subscribed

    Apr 24, 2012
    2,020
    UK
    Full Name:
    Robin
    #3 brogenville, Oct 19, 2018
    That’s more or less it. To get the surround out you need to get at a couple of screws behind the climate control panel. It’s got two bolts holding it in place on the underside which you can get at from the little storage area below. Undo them and it pops out.
     

Share This Page