News

Assembly # 3510 built 7/1990

Discussion in '348/355' started by vdettore, Dec 22, 2018.

  1. vdettore

    vdettore Formula Junior

    Mar 3, 2017
    353
    Georgia Coast
    Full Name:
    Vince
  2. To remove this ad click here.

  3. enzo360

    enzo360 F1 Veteran
    Consultant

    Aug 1, 2004
    5,185
    Belgium
    Full Name:
    Jurgen Durand
  4. enzo360

    enzo360 F1 Veteran
    Consultant

    Aug 1, 2004
    5,185
    Belgium
    Full Name:
    Jurgen Durand
    assembly 00022 = 11/ 1989
     
  5. steved033

    steved033 F1 Rookie
    Silver Subscribed Owner

    Apr 12, 2017
    3,404
    Atlanta, GA
    Full Name:
    Steve D.
    I don't have that plate.

    82641 = 8/89 build delivered in 5/1990....which is suddenly strange to me...
     
  6. bjwhite

    bjwhite F1 Rookie

    Mar 17, 2006
    4,041
    Seattle, WA
    Full Name:
    Brian White
    What plate don’t you have? The VIN plate above for assembly number 0004 is the “rest of world” VIN plate. The North American cars got one in a different format that contains the production month and year. So you wouldn’t have that particular plate. But yours would be similar, left door jamb. Rest of world is right door jamb.

    Here is mine. Euro 92 ts. May 1992 production date.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  7. To remove this ad click here.

  8. bjwhite

    bjwhite F1 Rookie

    Mar 17, 2006
    4,041
    Seattle, WA
    Full Name:
    Brian White
    Or maybe you were saying you don’t have an assembly number plate? Rear left top of suspension?
     
    steved033 likes this.
  9. steved033

    steved033 F1 Rookie
    Silver Subscribed Owner

    Apr 12, 2017
    3,404
    Atlanta, GA
    Full Name:
    Steve D.
    Door jamb, yes. assembly number, no, and my door jamb plate is the USA style one where the "august 1989" build date is listed.

    sjd
     
  10. bjwhite

    bjwhite F1 Rookie

    Mar 17, 2006
    4,041
    Seattle, WA
    Full Name:
    Brian White
    Wow that’s weird. Not even any holes where it should be? Send a pic. And yours is earlier than 0004 above.

    I wonder if some early ones snuck out of the factory without one?
     
  11. GTO Joe

    GTO Joe Formula Junior
    Silver Subscribed

    Feb 15, 2013
    797
    Charlotte, NC
    Full Name:
    Joseph Troutwine
    I have July build 82391 which also does not have the assembly plate later models have attached to the left rear upright. If you look at the picture of mine it does have a number 12 stamped in that area just below where the later cars have the plate. If you look closely you will note that the same number is just below as well in the rear cradle Image Unavailable, Please Login support. Also note there are no holes where a plate would normally be. I have speculated this was a body/assembly number used at that time but can't factually say for sure. My car is also reported here and several other sources to be the first 348 imported into the USA but I am still trying to get factual from Ferrari that is the case. The car was sold by Ferrari of Atlanta but not until 6/30/90 and a CarFax report shows there was millage at that time so again speculation is the car may have been the car used for publicity by Ferrari of America before being put out to sale. I have the bookwork that came with the car and have the name of the original owner but have been unsuccessful in contacting him so far but still trying. Hope this helps shed some additional light on the early units.
     
    steved033, vdettore and Pangea like this.
  12. To remove this ad click here.

  13. Rifledriver

    Rifledriver Two Time F1 World Champ

    Apr 29, 2004
    27,157
    Austin TX
    Full Name:
    Brian Crall

    That assy series with the plate started in very late 89 or early 90 and counted all cars built going forward for internal tracking. Not sure where they are now but in 2000 they were up over 37000. It does not indicate the 3510th 348, it indicates the 3510th Ferrari built since they started.
     
  14. vdettore

    vdettore Formula Junior

    Mar 3, 2017
    353
    Georgia Coast
    Full Name:
    Vince
    Great, thanks for the info.



    Vince FerrariChat.com mobile app
     
  15. steved033

    steved033 F1 Rookie
    Silver Subscribed Owner

    Apr 12, 2017
    3,404
    Atlanta, GA
    Full Name:
    Steve D.

    Mine looks EXACTLY like this. except i'm stamped "64"

    No holes for the assembly plate.

    Now i'm going to be looking for "64"s everywhere.

    sjd
     

Share This Page