Hi Folks, I picked up some new bushings for the pivots on the timing belt tensioner, as I am doing a belt change/major service on my F355 Just wondering if these pivot bushings are supposed to be lubricated or not. There was grease in the bushing when I took it apart, but that just means that what the last person did, doesn’t mean it was right. I ask because the bushings are coated with what seems like a teflon-like material, and the joint is not sealed either. Grease is of course a great lubricant, but in an un-sealed joint it also does a wonderful job of trapping moisture and dirt, so the grease could easily do more harm than good.... Thanks in advance!