355 Best OBDII option? Need to bleed ABS

I looked into the thinkdiag for you and unfortunately it doesn't appear to cover abs brakes bleeding ..which would mean the launch doesn't either

Sent from my moto g power using Tapatalk

 

Is the ABS linked into OBD-II? I have a 2.7 car so I don't know for sure. On some cars like the OBD-II Porsche 993 it is not. If that's the case with a F355, then you'll need something that replicates the factory scan tool.

 

You need an sd1 or 2,3
Or the Leonardo
I had this problem on mine after a major rebuild.
Your brakes will work ok but not good until the system is bled.

once your done just take it too a dealer for them to bleed it should take them less than 1 hr as that is what it took me on my Leonardo

 

I had too plug in to the abs system. It can not be done through the old port because the canline does not interconnect.
Most of the computers on the 355 are separate and do not talk to each other.

 

I never tried this but theoretically it might work if you can start the pump on the abs and then go to each wheel but the trick would be to get the abs to open each wheels solenoid as you open the bleed screws
I think as this is what the computer asked me to do

 

yes it plugs in directly to many things
The few things it does from the oOBD is the f1, the injectors, watching the ignition,
Clearing defaults like the cam sensor and many others I have not yet found out
Yes it’s the Galileo
I bought mine from nick at forza he’s very good, friendly, and helpful
I also have a f1 so I wanted it for that

 

Spell correct screwed my post
The abs Can not be accessed through the OBD port just for future reference