Cam / Bucket valve clearances | Page 2 | FerrariChat

Cam / Bucket valve clearances

Discussion in '206/246' started by yakxx21, Aug 4, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 2 of 2
  1. TonyL

    TonyL F1 Rookie

    Joined:
    Sep 27, 2007
    Messages:
    4,239
    Location:
    Norfolk - UK
    Full Name:
    Tony
    Not sure I follow but the factory spec remains the same in all cases, why would it change?
     
    TonyL, Aug 27, 2014
    #26
  2. 2NA

    2NA F1 World Champ Consultant Owner Professional Ferrari Technician

    Joined:
    Dec 29, 2006
    Messages:
    18,221
    Location:
    Twin Cities
    Full Name:
    Tim Keseluk
    Shape of take-up ramps, designed maximum lift are a couple likely reasons that clearances are recommended to be different from the OEM cams. It should be noted that there would likely be a bit of clatter at those settings.
     
    2NA, Aug 27, 2014
    #27
  3. Nickrry

    Nickrry Karting

    Joined:
    Jan 4, 2009
    Messages:
    156
    its probably common knowledge but I found a volvo garage that was throwing out shims from 740 and 940 models that appear to be identical to the Dino variants. I wondered if any other cars used similar?
     
    Nickrry, Aug 28, 2014
    #28
Page 2 of 2

Share This Page