Dino Heater hoses | FerrariChat

Dino Heater hoses

Discussion in '206/246' started by nerodino, Jul 31, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. nerodino

    nerodino Formula 3
    BANNED

    May 19, 2005
    1,161
    Suffolk UK
    Full Name:
    Graham
    Hello all,
    I have raised this question before but never had a thorough answer,does anybody know whether or not if the 80mm ID corrugated hose used on the air side of the heating system on the Dino is still available within the UK?
     
  2. dm_n_stuff

    dm_n_stuff Four Time F1 World Champ
    Lifetime Rossa Owner

  3. John Corbani

    John Corbani Formula 3
    Honorary Owner

    May 5, 2005
    1,153
    Santa Barbara, CA
    Full Name:
    John Corbani
    Aircraft international standards specify and manufacturers supply spring wire supported, silicone impregnated, fabric ducting. That is a mouthful but it is the ultimate definition. In the US we can buy this ducting in 1/8" or 1/4" dia. increments in virtually any length. It comes in red, lasts forever. Go to your local FBO (Fixed Base Operator) at your local airport. Something around $1.00 per inch makes it a bargain compared to some Ferrari parts supplier's prices.

    We can't find OEM ducting here either.

    Luck,

    John
     
  4. dm_n_stuff

    dm_n_stuff Four Time F1 World Champ
    Lifetime Rossa Owner

    #4 dm_n_stuff, Aug 9, 2005
    Last edited by a moderator: Sep 7, 2017
  5. racerboy9

    racerboy9 F1 Rookie
    Silver Subscribed

    Nov 3, 2003
    2,514
    Ferrari Parts Exchange and Re-Originals have the right ducting or at least it is very close. I lucked up on NOS pieces years ago. Remember you can stretch the stuff out quite a bit--almost 50%. Moss Motors sells very similar stuff for the MGA and Austin Healy. It is a little big but looks quite similar.
     

Share This Page