News

document template for car setup/changes, etc.

Discussion in 'Other Racing' started by Schatten, Mar 24, 2004.

  1. Schatten

    Schatten F1 World Champ
    Rossa Subscribed Owner

    Apr 3, 2001
    11,237
    Austin, TX
    Full Name:
    Randy
    Looking for anyone who has a document template for car setup/changes, etc. This can include alignment settings & weight distribution, but main concern is with triple adjustable settings + nitrogen for each session, spoiler adjustments, tire pressures, etc. I can take one and modify it for my own use, but looking for suggestions or any samples you might have.

    thanks!
     
  2. To remove this ad click here.

  3. rob lay

    rob lay Administrator
    Staff Member Admin Social Subscribed Miami 2018 Owner

    Dec 1, 2000
    50,817
    Southlake, TX
    Full Name:
    Rob Lay
    Not really what you are looking for, although I've seen exactly what you are looking for. We don't change setup much with the RX7's, so we don't need to write everything down.

    I think a setup sheet would include (maybe we can just start our own list)...

    For all four corners...

    Camber
    Caster
    Toe
    Cold Pressure
    Hot Pressure
    Inside, Center, Outside tire temps
    Rotor temp

    Other...

    Car weight (with or w/o driver & fuel load)
    Sway bar setting
    Sprint setting
    Gearing
    Timing

    Here are two lists, one is a complete race car tech inspection form and the other is my personal reminder list for personal and racing stuff for weekends.
     
  4. Schatten

    Schatten F1 World Champ
    Rossa Subscribed Owner

    Apr 3, 2001
    11,237
    Austin, TX
    Full Name:
    Randy
    Thanks Rob.

    Jeff Fisher scanned up a few pages from a book and threw it over. I'll either end up printing it out or selectively reproducing it for my up and coming needs (OTC '04).

    http://www.whoapower.com/otc/prep.pdf (880 KB Adobe PDF file)
     
  5. Mitch Alsup

    Mitch Alsup F1 Veteran

    Nov 4, 2003
    7,008
    I have an eXcel spreadsheet to do this for my F355. Would you like to see it?
     

Share This Page