Exhaust spring #111743 | FerrariChat

Exhaust spring #111743

Discussion in '308/328' started by absostone, Feb 21, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. absostone

    absostone F1 Veteran
    Silver Subscribed

    Jul 28, 2008
    9,281
    #1 absostone, Feb 21, 2018
    If anyone has the springs that holds tension on the exhaust flanges. Please post the dimensions. Thanks Mike
     
  2. Saabguy

    Saabguy Formula 3
    Silver Subscribed

    Mar 28, 2012
    1,761
    Shreveport, LA
    #2 Saabguy, Feb 21, 2018
    I don't have dimensions but I believe that I got mine from McMaster Carr. Let me check tomorrow.
     
  3. absostone

    absostone F1 Veteran
    Silver Subscribed

    Jul 28, 2008
    9,281
    #3 absostone, Feb 22, 2018
    Awesome thx please.
     
  4. Saabguy

    Saabguy Formula 3
    Silver Subscribed

    Mar 28, 2012
    1,761
    Shreveport, LA
    #4 Saabguy, Feb 23, 2018
    Sorry, I was mistaken, they came from Ricambi, either part number 111743 or 121674. And either $10 or $15.11 each respectively. Well, at least in 2012.
     
  5. absostone

    absostone F1 Veteran
    Silver Subscribed

    Jul 28, 2008
    9,281
    #5 absostone, Feb 23, 2018
    Ok thanks. Another member gave me the specs of 111743. And I found similar size at McMaster. I'll post in cross ref later. Thx
     
  6. Saabguy

    Saabguy Formula 3
    Silver Subscribed

    Mar 28, 2012
    1,761
    Shreveport, LA
    #6 Saabguy, Feb 23, 2018
    Hmm... guess that I should have read the entire title. ;-)
     
  7. absostone

    absostone F1 Veteran
    Silver Subscribed

    Jul 28, 2008
    9,281
    #7 absostone, Mar 14, 2018
    Exhaust spring #111743
    26mm length
    O.D 18.75
    I.D 10.6
    WIRE 4mm
    Thank you Wildcat 326
     
  8. Saabguy

    Saabguy Formula 3
    Silver Subscribed

    Mar 28, 2012
    1,761
    Shreveport, LA
    #8 Saabguy, Mar 14, 2018
    Did you find the McMaster Carr replacement?
     
  9. absostone

    absostone F1 Veteran
    Silver Subscribed

    Jul 28, 2008
    9,281
    #9 absostone, Mar 14, 2018
    Kinda. There are two that I think would work. Copy the sizes and maybe you could see which are the closest. I'm not sure if I saved the part numbers
     
  10. absostone

    absostone F1 Veteran
    Silver Subscribed

    Jul 28, 2008
    9,281
    #10 absostone, Mar 14, 2018
    I'll check later. But I ended up using the springs and sleeves from Ferrparts. And the washers bolt and nut and lock washer from the hardware store
     
  11. absostone

    absostone F1 Veteran
    Silver Subscribed

    Jul 28, 2008
    9,281
    #11 absostone, Mar 14, 2018
    Saabguy likes this.

Share This Page